WWW.PHIHONG.COM 110W Universal Industrial Series PSA110 Single Output L-Bracket Features • Integral EMI filter • 100% Burn-In • Low Profile Design • Over Voltage Protection Applications • Network • Computer Peripherals • Low Profile Racks • Business Machines Safety Approvals • UL 1950 • CSA 22.2 234 • TUV EN 60950 • CE (Low Voltage Directive) Mechanical Characteristics Dimensions: • Length: 172.7mm (6.81in) • Width: 93.5mm (3.7in) • Height: 43.6mm (1.7in) • Weight: 0.72kgm (1.6Ib) Output Specifications Model DC Output Load Ripple (2) Regulation Voltage Min. Convection Max. P-P Line Load PSA110-105 +5V 1A 16A 22A 50mV +2% +2% PSA110-112 +12V 0A 7A 9A 120mV +2% +2% PSA110-115 +15V 0A 5A 7.3A 150mV +2% +2% PSA110-124 +24V 0A 3.3A 4.5A 240mV +2% +2% (1) Measured by using a 12 inch twisted pair terminated with a 10mfd capacitor and 0.1mfd ceramic capacitor in parallel with primary and secondary ground holes connected together. (2) Forced air 30CFM required. WWW.PHIHONG.COM PSA110 Single Characteristics Overcurrent Protection Short circuit protected Auto-Restart Operation Temperature 0 to +50˚C Humidity 10 to 90% (Non-Condensing) Storage Temperature -25 to +85˚C MTBF Calculated Greater than 100,000 hours, full load, 25˚C (MIL-HDBK-217F) EMI FCC Class B EN55022 B Mating Connectors AC: Molex 09-50-3051 DC: Molex 09-50-3081 POWER SUPPLY AC Input Voltage 90VAC-264VAC AC Frequency 47 to 63Hz AC Input Current 3A maximum (115V) 1.5A Maximum (230V) Leakage Current 0.75mA (254VAC, 50Hz) AC Inrush Current (Cold Start) 25A at 115VAC 50A at 240VAC Efficiency 70% typical at full load, 120VAC Hold-up Time 16msec. at full load, 120VAC Switching Frequency 50KHz, typical Overvoltage Protection All models Dimension Diagram Unit: mm (inch) PSA110S/0312