WWW.PHIHONG.COM 5W USB Adapter with Interchangeable Plugs PSB05R Series Features • • • USB Socket Field Changeable AC Plugs CEC Compliance • • • Low Leakage Current UL 94 Vo Flammability No Load Power Consumption < 0.3 Watt • • Portable Equipment Networking • • CE C-Tick • • Height: 31.67mm (1.25in) Weight: 61.1g (2.16oz) Applications • • Wireless Communications Peripherals Safety Approvals • • • cUL/UL TUV SAA Mechanical Characteristics • • Length: 75.32mm (2.97in) Width: 45.96mm (1.81in) Output Specifications Load Model PSB05R-050Q(A)-R Ripple (1) DC Output Voltage Min. Max. P-P (max) 5V 0A 1A 55mV Regulation Line Load ±5% Note: (1) Measured by using a 12-inch twisted pair terminal with a 10uf EC capacitor and a 0.1uf ceramic in parallel, measured at maximum load. Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the factory and visit www.phihong.com for the most up-to-date specifications. PSB05R Characteristics INPUT: WWW.PHIHONG.COM AC Input Voltage Rating Short Circuit Protection 100 to 240VAC Output can be shorted without damage AC Input Voltage Range Adapter Detection: 90 to 264VAC AC Input Current Each data line (Data+ and Data-) is tied to +VDC via a 7.5K Ohm resistor and to DC RTN via a 15K Ohm resistor 200mA(RMS) max. @ 115VAC 80mA(RMS) max. @ 230VAC ENVIRONMENTAL: Leakage Current Temperature 20uA max. @ 254VAC, 50Hz Operation Non-operation Inrush Current (cold) Humidity <40A for 240VAC at max. load (Cold start @ ambient 25°C) Operation Input Power Saving 0 to +45°C -20 to +75°C 20 to 90% Emissions 0.3W max. for 240VAC at no load FCC Part 15 Class B CISPR 22 Class B OUTPUT: Dielectric Withstand (Hi-pot) Test Efficiency Primary to Secondary: 3000VAC 62% min. Hold-up Time 10mS min. @ 120VAC and Max. load Over-load Protection 5A max. Over-voltage Protection 8VDC max. Dimension Diagram Unit: mm (inch) AC Input Clips (sold separately) US: RPA Europe: RPE UK: RPK Australia: RPS