WWW.PHIHONG.COM 150 Watt Universal Industrial Series PSF149 Quad-Output Enclosed Power Supply Features • Low Cost • Enclosed Cover • Power Factor Correction • Low Profile Design Applications • Test Equipment • Low Profile Racks • Process Control Safety Approvals Pending • cUL 1950, 3rd Edition • CE (Low Voltage Directive) • Networking • Business Machines • TUV EN60950 Mechanical Characteristics Dimensions:Length: 201.4+/-0.1mm (7.93in) Width: 99.4+/-0.1mm (3.91in) Height: 39.1+/-0.1mm (1.54in) Weight: 0.9kg (1.98lb.) Output Specifications Model DC Outputs Voltage PSF149-401 5V -5V -12V +12V Load Min. 3A 0.2A 0.2A 1A Ripple and Regulation Conv. Max.(30cfm) Noise Line Load 9A 0.6A 0.6A 3A 15A 1A 1A 5A 50mV p-p 100mV p-p 100mV p-p 100mV p-p 1% 2% 2% 2% +5% +6% +6% +6% Phihong is not responsible for any errors or changes. Please contact the factory and visit www.phihong.com for the most up-to-date specifications. WWW.PHIHONG.COM PSF149 Characteristics ENVIRONMENTAL: Operation Temperature 0 to 50˚C Storage Temperature -25˚C to +85˚C Humidity 20 to 90% Emissions FCC Class A EN 55022 Class A Immunity ESD EN61000-4-2: Level 3 RS EN61000-4-3: Level 2 FET/Burst EN61000-4-4: Level 2 Surge EN61000-4-5: (L-G) Level 3 (L-N) Level 2 CS EN61000-4-6: Level 2 DIP EN61000-4-11 Harmonic EN61000-3-2 Class D Flicker EN61000-3-3 POWER SUPPLY INPUT: AC Input Voltage Rating 100 to 240VAC AC Input Voltage Range 90 to 264VAC AC Input Frequency 47 to 63Hz Input Surge Current 60A max.@cold start for 230VAC Input Current 4A max. OUTPUT: Efficiency 70% min.@115VAC and max. load Hold-up Time 16mS min.@120VAC and max. Load Power Factor Correction >0.9@max. load Overvoltage Protection 6.8V max. for +5V Overcurrent Protection All outputs equipped with short circuit protection GENERAL: Dielectric Withstand (HIPOT) Test Primary to secondary: 3000VAC 10mA 1 min.@without U-CASE MTBF (Full load, 25˚C) 50K Hrs min. at max. load 25˚C ambient temperature Dimension Diagram Unit: mm (inch) PSF149/0312