LV99D Series 3.3 V LVDS Clock Oscillators January 2007 • Pletronics’ LV99D Series is a quartz crystal controlled precision square wave generator with an LVDS output. • The package is designed for high density surface mount designs. • Low cost mass produced oscillator. • Tape and Reel or cut tape packaging is available. • • • • • 5 x 7 mm LCC Ceramic Package Enable/Disable Function on pad 1 Output frequency is synthesized. Low Jitter RoHS 6/6 Compliant Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.16 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +5.0V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2007, Pletronics Inc. LV99D Series 3.3 V LVDS Clock Oscillators January 2007 Part Number: LV99 45 D E V -375.0M -XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHz Supply Voltage VCC V = 3.3V _ + 10% Temperature Range blank = -10 to +70oC E = -40 to +85oC Series Model Frequency Stability 45 = + _ 50 ppm 44 = + _ 25 ppm 20 = + _ 20 ppm Series Model Part Marking: PLE LV99 FF.FFF M C YMDXX Marking Legend: PLE = Pletronics FF.FFF M = Frequency in MHZ YMD = Date of Manufacture (year-month-day) All other marking is internal factory codes Codes for Date Code YMD Code Year 7 2007 Code A JAN Month Code Day Code Day Code Day 8 2008 1 1 D 13 T 25 9 2009 B FEB 2 2 E 14 U 26 C MAR 3 3 F 15 V 27 www.pletronics.com 0 2010 D APR 4 4 G 16 W 28 E MAY 5 5 H 17 X 29 425-776-1880 1 2011 F JUN 6 6 J 18 Y 30 2 2012 G JUL 7 7 K 19 Z 31 H AUG J SEP K OCT 8 8 L 20 9 9 M 21 A 10 N 22 L NOV M DEC B 11 P 23 C 12 R 24 2 LV99D Series 3.3 V LVDS Clock Oscillators January 2007 Electrical Specification for 3.30V _ +10% over the specified temperature range and the frequency range of 10.9 MHz to 670 MHz Item Min Max Unit Condition Frequency Accuracy “45" -50 +50 ppm “44" -25 +25 For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures “20" -20 +20 Output Waveform LVDS Output High Level -- 1.60 Volts Output Low Level 0.90 -- Volts Differential Output (VOD) 250 450 mVolts 1.125 1.375 Volts Differential Output Error (dVOS) -- 50 mVolts Output Symmetry 47 53 % Referenced to 50% of amplitude or crossing point Output TRISE and TFALL 150 230 pS Vth is 20% and 80% of waveform - 0.6 pS RMS - 2.8 Output Short Circuit Current - -20 mA Vcc Supply Current - 80 mA 50 - Kohm To Vcc (equivalent resistance) V disable - 0.8 Volts Referenced to Ground V enable 2.0 - Volts Referenced to Ground VOUT = VCC -20 +20 uA VOUT = 0V -20 +20 uA Enable - 10 nS Time for output to reach a logic state Disable time - 10 nS Time for output to reach a high Z state Start up time - 5 mS Measured from the time Vcc = 3.0V Output Offset Voltage (VOS) Jitter Enable/Disable Internal Pull-up Output leakage Operating Temperature Range -10 -40 Storage Temperature Range -55 See load circuit R1 = 50 ohms Measured from 12KHz to 20MHz from Fnominal Measured from 10Hz to 20MHz from Fnominal Vout = 0.0V Pad 1 low, device disabled +70 o Standard Temperature Range +85 o Extended Temperature Range +125 o C C “E” Option C Specifications with Pad 1 E/D open circuit www.pletronics.com 425-776-1880 3 LV99D Series 3.3 V LVDS Clock Oscillators January 2007 Typical Phase-Noise Response 0 -20 dBc/Hz -40 -60 100MHz dBc/Hz -80 400MHz dBc/Hz -100 -120 -140 -160 10 1,000 100,000 10,000,000 Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh Out 80% 50% 20% Vlow Out* Trise Tfall Showing Out Measurement only www.pletronics.com 425-776-1880 4 LV99D Series 3.3 V LVDS Clock Oscillators January 2007 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating Model Minimum Voltage Conditions Human Body Model 2000 MIL-STD-883 Method 3115 Charged Device Model 1500 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII www.pletronics.com Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial 425-776-1880 5 LV99D Series 3.3 V LVDS Clock Oscillators January 2007 Mechanical: Inches 2 5 7.00 + _ 0.15 B 0.197 + _ 0.006 5.00 + _ 0.15 C 0.067 max 1.70 max D1 0.038 0.96 E1 0.200 5.08 F1 0.004 0.10 G1 0.050 1.27 H1 0.055 1.40 1 0.024 0.60 J1 0.004r 0.10r K1 0.008r 0.20r L1 0.089 2.25 M1 0.010r 0.25r 3 4 0.276 + _ 0.006 1 6 A I Contacts: Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm 1 Pad Typical dimensions Not to Scale Center metalized pad on the base is not connected. mm Function Note 1 Output Enable/Disable When this pad is not connected the oscillator shall operate. If <0.80 volts, the output will be inhibited (high impedance state.) Recommend connecting this pad to VCC if the oscillator is to be always on. 2 No connect This pad should be connected to Ground or Supply Voltage to lower the packages thermal resistance. 3 Ground (GND) 4 Output 5 Output* The outputs must be terminated, 100 ohms between the outputs is the ideal termination. Capacitor coupled terminations can be used. 6 Supply Voltage (VCC) Recommend connecting appropriate power supply bypass capacitors as close as possible. www.pletronics.com 425-776-1880 6 LV99D Series 3.3 V LVDS Clock Oscillators January 2007 Reflow Cycle (typical for lead free processing) 260°C Maximum 10 Seconds Maximum Temperature (°C) 250 215°C±10°C 200 175°C±10°C 150 100 Approximately 50 Seconds 120 to 160 Seconds Allowed rate of temperature change Maximum 4°C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250 Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 1.0 S1 Min T Max 0.6 0.6 T1 Max 2.0 +0.05 _ 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 _ +0.1 _0.1 + 24mm P2 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 16 mm 12.1 14.25 7.5 _ +0.1 8.0 + _0.1 8.0 16.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width 16.4 +2.0 -0.0 16.0 C mm D mm 13.0 +0.5 / -0.2 16.4 +2.0 -0.0 16.4 +2.0 -0.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 7 LV99D Series 3.3 V LVDS Clock Oscillators January 2007 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: [email protected] URL: www.pletronics.com Copyright © 2007, Pletronics Inc. www.pletronics.com 425-776-1880 8