PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Do Not Use for New Designs - use PE55 or PE77 • Pletronics’ PE76D/PE78D Series is a quartz crystal controlled precision square wave generator with a PECL output. • FR4 base with a mechanical metal cover. • Solder pad compatible with many 9x14mm plastic J lead packages. • Has internal bypass capacitor on the Vcc lead • Tape and Reel or cut tape packaging is available. • 40 to 250 MHz • 9.04mm x 8.91mm (S package) • Enable/Disable PE76D on pad 1 PE78D on pad 2) • Disable function includes low standby power mode • 3rd Overtone Crystals used • Low Jitter • 5x7 mm LCC ceramic oscillator PE77 series Pletronics Inc. certifies this device is in accordance with the RoHS 5/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.4 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +7.0V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms Inc. to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2006, 2007, 2008, Pletronics PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Part Number: PE7x 45 D E W -125.0M -XX Part Marking: PLE PE77 FF.FFF M C YMDXX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHz Supply Voltage VCC W = 2.5V _ + 10% Optional Enhanced OTR Blank = Temp. range -10 to +70oC E = Temp. range -40 to +85oC Series Model Frequency Stability 45 = + _ 50 ppm 44 = + _ 25 ppm 20 = + _ 20 ppm Series Model (where x is a 6 or 8) Marking Legend: The marking is the PE77xxDW device PLE = Pletronics The Tape and Reel and box marking shows the PE7x PN. FF.FFF M = Frequency in MHz YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day) All other marking is internal factory codes Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code Year 6 2006 Code A JAN Month Code Day Code Day Code Day 7 2007 8 2008 B FEB 9 2009 C MAR D APR E MAY 0 2010 F JUN 1 2011 2 2012 G JUL H AUG J SEP K OCT L NOV M DEC 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 A 10 B 11 C 12 D 13 E 14 F 15 G 16 H 17 J 18 K 19 L 20 M 21 N 22 P 23 R 24 T 25 U 26 V 27 W 28 X 29 Y 30 Z 31 www.pletronics.com 425-776-1880 2 PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Electrical Specification for 2.50V _ +5% over the specified temperature range Item Min Max Unit Frequency Range 40 250 MHz Frequency Accuracy “45" -50 +50 ppm For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures “44" -25 +25 “20" -20 +20 Output Waveform Condition PECL /ECL o o Output High Level (0 C to 85 C) o Output High Level (-40 C) o o Output Low Level (0 C to 85 C) o Output Low Level (-40 C) Output Symmetry 1.475 1.760 volts Referenced to Ground, VCC = 2.5 V 0.975 1.260 volts Referenced to termination voltage, VCC = 2.5 V -1.025 -0.740 volts Referenced to Vcc, VCC = 2.5 V 1.415 1.620 volts Referenced to Ground, VCC = 2.5 V 0.915 1.12 volts Referenced to termination voltage, VCC = 2.5 V -1.085 -0.88 volts Referenced to Vcc, VCC = 2.5 V 0.690 1.095 volts Referenced to Ground, VCC = 2.5 V 0.190 0.595 volts Referenced to termination voltage, VCC = 2.5 V -1.810 -1.405 volts Referenced to Vcc, VCC = 2.5 V 0.670 1.195 volts Referenced to Ground, VCC = 2.5 V 0.170 0.695 volts Referenced to termination voltage, VCC = 2.5 V -1.830 -1.305 volts Referenced to Vcc, VCC = 2.5 V 45 55 % - 0.13 pS RMS 12 KHz to 20 MHz from the output frequency - 2.8 pS RMS 10 Hz to 1 MHz from the output frequency Output TRISE and TFALL - 0.7 nS VCC Supply Current (ICC) - 90 mA 50 - Kohm to VCC V disable - 0.6 volts Referenced to pad 3 V enable 1.7 - volts Referenced to pad 3 -10 +10 uA -10 +10 uA Enable time - 10 nS Time for output to reach a logic state Disable time - 10 nS Time for output to reach a high Z state - 10 mS Time for output to reach specified frequency -10 +70 o Standard Temperature Range +85 o Extended Temperature Range -55 +125 o - 3 Jitter Enable/Disable Internal Pull-up Output leakage VOUT = VCC VOUT = 0V Start up time Operating Temperature Range - 40 Storage Temperature Range Standby Current ICC C C at 50% point of VCC (See load circuit) Vth is 20% and 80% of waveform Pad 1 low, device disabled “E” Option C uA Pad 1 low, device disabled Specifications with Pad 1 E/D open circuit www.pletronics.com 425-776-1880 3 PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Typical Phase-Noise Response 0 -20 dBc/Hz -40 -60 -80 -100 -120 -140 -160 10 1,000 100,000 10,000,000 Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh Out 80% 50% 20% Vlow Out* Trise Tfall Showing Out Measurement only www.pletronics.com 425-776-1880 4 PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII (PE76 example shown) www.pletronics.com Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial 425-776-1880 5 PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Mechanical: 5 2 4 3 All via holes tented on bottom Copper Clad 670 µinch (17 µm) Nickel plated 118 µinch (3 µm) Gold plated 0.8 µinch (0.02 µm) Typical thicknesses Pin 3 Ground plane is typical Not to scale Pad Function Note mm B 0.356 + _ 0.005 9.04 + _ 0.13 C 0.126 + _ 0.005 3.21 + _ 0.13 D 0.324 + _ 0.005 8.23 + _ 0.13 F1 0.050 1.27 G1 0.040 1.02 H1 0.059 1.50 I1 0.020 0.51 J1 0.040 1.02 K1 0.100 2.54 L1 0.062 1.57 1 6 FR4 PCB Base: Solder masked Label: laser marked lettering Inches 76 78 1 2 Output Enable/Disable When this pad is not connected the oscillator shall operate. When this pad is <0.30 volts, the output will be inhibited (high impedance state.) Recommend connecting this pad to VCC if the oscillator is to be always on. 2 1 No connect There is no internal connection to this pad 3 Ground (GND) 4 Output 5 Output* 6 Supply Voltage (VCC) Both outputs must be terminated and biased for proper operation. The ideal termination is 50 ohms connected to 2.0V below the Supply Voltage. Recommend connecting appropriate power supply bypass capacitors as close as possible. Layout and application information Recommend connecting Pad 1 and Pad 2 together to permit the design to accept both Enable/Disable input pad versions to be used For Optimum Jitter Performance, Pletronics recommends: • a ground plane under the device • no large transient signals (both current and voltage) should be routed under the device • do not layout near a large magnetic field such as a high frequency switching power supply • do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 6 PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Mechanical (obsolete version): The cover is no longer being supplied over this part. This part is made with a hermetically sealed PE77xxDW series oscillator. This part is now exposed. The cover has been deleted, the cover was causing problems with the newer high temperature RoHS lead free processes. The cover purpose was only cosmetic. All parts with 2008 date codes will be made in the new fashion. There is no change in electrical properties. Pletronics does recommend that all designs should transition to the PE77xxDW ceramic part. Cover: Centered on the base 304 Stainless Steel 0.010 inch (0.25mm) Electroless Nickel Plated 1 µinch (25 µm) typical Label: White Kapton with Black Letters –or-Blue Epoxy heat cure ink covering top with laser marked lettering • • • FR4 PCB Base: Solder masked Solder masked All via holes tented on bottom Copper Clad 670 µinch (17 µm) Nickel plated 118 µinch (3 µm) Gold plated 0.8 µinch (0.02 µm) Typical thicknesses Pin 3 Ground plane is typical Not to scale Inches mm A 0.351 + _ 0.003 8.91 + _ 0.07 B 0.356 + _ 0.005 9.04 + _ 0.13 C 0.103 + _ 0.005 2.62 + _ 0.13 D1 0.324 8.23 E1 0.316 8.03 F1 0.050 1.27 G1 0.040 1.02 H1 0.059 1.50 I1 0.020 0.51 J1 0.040 1.02 K1 0.100 2.54 L1 0.026 typical 0.66 The package is not hermetically sealed. The sides are intentionally left open to permit cleaning material to freely flow in the package, thus minimizing the accumulation of contaminants during cleaning processes. The internal part of the package must be thoroughly dry before operating. www.pletronics.com 425-776-1880 7 PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 Temperature (°C) Reflow Cycle (typical for lead free processing) 260°C Maximum 10 Seconds Maximum 250 215°C±10°C 200 175°C±10°C 150 100 Approximately 50 Seconds 120 to 160 Seconds Allowed rate of temperature change Maximum 4°C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250 Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 1.0 S1 Min T Max 0.6 0.6 T1 Max 2.0 +0.05 _ 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 _ +0.1 _0.1 + 24mm P2 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 24 mm 9.88 22.25 11.5 _ +0.1 16.0 + _0.1 3.22 24.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width 24.4 +2.0 -0.0 24.0 C mm D mm 13.0 +0.5 / -0.2 --- --- Reel dimensions may vary from the above www.pletronics.com 425-776-1880 8 PE76D / PE78D Series 2.5 V PECL Clock Oscillators January 2008 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: [email protected] URL: www.pletronics.com Copyright © 2006, 2007, 2008 Pletronics Inc. www.pletronics.com 425-776-1880 9