SW11B Series Sine Wave Oscillators December 2006 • Pletronics’ SW11B Series is a quartz crystal controlled precision sine wave signal source. • FR4 base with a mechanical metal cover. • Low Profile (2.9mm maximum) • Tape and Reel or Tube packaging is available. • • • • • 10 to 700 MHz 14.0mm x 9.9mm package 5V Operation Excellent phase noise performance 50 ohm load with internal blocking capacitor Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 1.33 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +7.0V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2006, Pletronics Inc. SW11B Series Sine Wave Oscillators December 2006 PART NUMBER: SW11 45 BY E - 230.0M - XX Internal code or blank Frequency in MHz Optional Enhanced OTR E = Temperature range -40 to 85oC Series Model Frequency Stability 45 = + _ 50 ppm 44 = + _ 25 ppm 20 = + _ 20 ppm Series Model Part Marking: PLE SW11 FF.FFFM C YMDXX or SWYWWXX FF.FFFM C PXXXXX Legend: P or PLE FF.FFFM YWW or YMD = Pletronics = Frequency in MHz = Date of Manufacture (year and week, or year, month and day) All other marking is internal factory codes Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code Year 6 2006 7 2007 8 2008 9 2009 0 2010 1 2011 2 2012 Code A B C D E F G H J K L M Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC 5 6 7 8 9 A B C 12 Code 1 2 3 4 Day 1 2 3 4 5 6 7 8 9 10 11 Code D E F G H J K L M N P R Day 13 14 15 16 17 18 19 20 21 22 23 24 Code T U V W X Y Z Day 25 26 27 28 29 30 31 Electrical Specification: for Supply Voltage VCC of 5.0V + _5%, over the specified temperature range www.pletronics.com 425-776-1880 2 SW11B Series Sine Wave Oscillators December 2006 Item Min Max Unit Frequency Range 10 700 MHz Frequency Accuracy -- -- ppm Harmonic Output -- --15 dBc Spurious Output -- -50 dBc of VCC -7.0 -4.0 dBM Load of 50 ohms Year 1 -5.0 +5.0 ppm at 25oC Subsequent -2.0 +2.0 ppm -------- -59 -87 -118 -147 -150 -152 -152 Current ICC - 90 mA Pin 1 low, device disabled Start up time - 10 mS Time for output to reach specified frequency Operating Temperature Range 0 +70 o Standard Temperature Range -40 +85 o Extended Temperature Range -55 +125 o Output Level Aging Phase Noise 10 Hz offset 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz 10 MHz Storage Temperature Range Load Circuit Condition Determined by part number and inclusive for power supply, temperature and load (See load circuit) Example at 200MHz dBc/Hz C C “E” Option C (50 ohm nominal load and no capacitance) www.pletronics.com 425-776-1880 3 SW11B Series Sine Wave Oscillators December 2006 Mechanical Inches FR4 PCB Base: Solder masked All via holes tented on bottom Copper Clad ½ oz. Typical Gold plated 0.02 µinch (0.5 µm) Label: White Kapton with Black Letters –or-Blue Epoxy heat cure covering top with laser marked lettering Pad mm A 0.390 + _ 0.010 9.90 + _ 0.25 B 0.550 + _ 0.010 13.97 + _ 0.25 C 0.115 max 2.92 max D1 0.026 typ. 0.66 E1 0.050 1.27 F1 0.028 R 0.72 R G1 0.180 4.57 H1 0.200 5.08 I1 0.050 1.27 Pin 2 Ground plane is typical J1 0.015 0.38 Not to scale K1 0.380 9.65 Cover: Centered on the base 304 Stainless Steel 0.010 inch (0.25µm) Electroless Nickel Plated 1 µinch (25 µm) typical Function Note 1 NC no connection 2 NC no connection 3 Ground (GND) 4 Output 50 ohm load, internal DC blocking capacitor rated at 25V 5 NC no connection 6 Supply Voltage (VCC) Recommend connecting appropriate power supply bypass capacitors as close as possible. www.pletronics.com 425-776-1880 4 SW11B Series Sine Wave Oscillators December 2006 Temperature (°C) Reflow Cycle (typical for lead free processing) 260°C Maximum 10 Seconds Maximum 250 215°C±10°C 200 175°C±10°C 150 100 Approximately 50 Seconds 120 to 160 Seconds Allowed rate of temperature change Maximum 4°C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 P2 1.0 T Max 0.6 0.6 T1 Max 2.0 + _0.05 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 + _0.1 + _0.1 24mm S1 Min 0.1 2.0 + _0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 24 mm 15.54 22.25 11.5 + _0.1 16.0 + _0.1 5.16 24.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width C mm 13.0 +0.5 / -0.2 D mm 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.0 mm --- --- 24.4 +2.0 -0.0 24.0 mm --- --- 32.4 +2.0 -0.0 32.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 5 SW11B Series Sine Wave Oscillators December 2006 Tape and Reel labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII (Part number will read SW11xxBY-106.25M for example) Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial Layout and application information For Optimum Jitter Performance, Pletronics recommends: • a ground plane under the device • no large transient signals (both current and voltage) should be routed under the device • do not layout near a large magnetic field such as a high frequency switching power supply • do not place near piezoelectric buzzers or mechanical fans. Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 www.pletronics.com 425-776-1880 6 SW11B Series Sine Wave Oscillators December 2006 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: [email protected] URL: www.pletronics.com Copyright © 2005, 2006, Pletronics Inc. www.pletronics.com 425-776-1880 7