TBA4 Series TCVCXO Oscillator February 2009 • Pletronics’ TBA4 Series is a temperature compensated voltage controlled crystal oscillator with a clipped sinewave output. • The package is designed for high density surface mount designs. • Tape and Reel packaging is available. • • • • 8 to 52 MHZ Stabilities to less than 0.2ppm available 5 x 7 mm LCC Ceramic Package Optional Voltage Control Function Pletronics Inc. certifies this device is in accordance with the RoHS (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.3 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +6.5V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product informatin is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necesarily include testing of all parameters. Copyright © 2009, Pletronics Inc. TBA4 Series TCVCXO Oscillator February 2009 Part Number: TBA4 031 035 G H 015 008 -40.0M -XX Internal code or blank Nominal Frequency in MHZ Pullability in ppm (Vcontrol) 000 = TCXO only 008 = _ + 8 ppm minimum 015 = _ + 15 ppm minimum Stability in ppm 010 = _ + 1 ppm 015 = _ + 1.5 ppm 025 = _ + 2.5 ppm 001 = _ + 0.1 ppm 002 = _ + 0.2 ppm 005 = _ + 0.5 ppm 007 = _ + 0.7 ppm Highest Specified Operating Temperature A = +40oC E = +60oC J = +80oC B = +45oC F = +65oC K = +85oC C = +50oC G = +70oC D = +55oC H = +75oC Lowest Specified Operating Temperature A = +10oC E = -10oC J = -30oC F = -15oC K = -35oC B = +5oC o o G = -20 C L = -40oC C = +0 C o o H = -25 C M = -45oC D = -5 C Highest Supply Voltage* 055 = 5.5 volts 035 = 3.5 volts 036 = 3.6 volts 030 = 3.0 volts Lowest Supply Voltage * 045 = 4.5 volts 031 = 3.1 volts 030 = 3.0 volts 027 = 2.7 volts Series (Part Type, Logic & Package) * Supply Voltage: Select range between 2.7V and 5.5V with ratio of Highest / Lowest < 1.20 For Example: the part number for 3.3V nominal could be TBA4030036......... ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 www.pletronics.com 425-776-1880 2 TBA4 Series TCVCXO Oscillator February 2009 Electrical Specification for specified Vcc over the specified temperature range Item Frequency Range Frequency Accuracy 1 Frequency Stability versus Supply Min Max Unit 10 52 MHZ -2.5 -0.1 +2.8 +0.1 ppm Vcontrol 1.50 volts if used 2 -0.2 +0.2 ppm Load: 10K ohm // 10 pF & VCC _ + 5% Output Waveform Output Amplitude Condition Clipped Sinewave 1.0 0.8 - V P-P 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz >10 KHz - -62 -91 -116 -137 -145 -145 dBc/Hz VCC 2.7 5.5 Volts Supply Current ICC at 13 MHZ ICC at 26 MHZ ICC at 52 MHZ - 2.0 2.7 4.4 mA 10K ohm // 10 pF Start-up time - 10 mS to be within ±3 ppm of the final frequency Aging -1.0 -0.5 +1.5 +0.5 ppm Per year at 25oC for the first year For any year thereafter Vcontrol Range 0.5 2.50 Volts 1.50 volts nominal Vcontrol Input Current -50 +50 uA Frequency Pullability 1 -15 +15 ppm Operating Temperature Range 1 -45 +85 o Storage Temperature Range -55 +95 o Phase Noise V Supply Range 1 1 2 <=40 MHZ >40 MHZ Load: 10K ohm // 10 pF C C Specified by part number For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures www.pletronics.com 425-776-1880 3 TBA4 Series TCVCXO Oscillator February 2009 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition A Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A Part Marking: TBymda fff.fff M PLHXXX Where: ymd = Date code fff.fff = frequency in MHZ P = Pletronics LH = Lowest Temp, Highest Temp XXX = Stability Due to part size limitations, marking cannot identify complete specifications. Codes for Date Code YMD Code Year Code Month Code Day Code Day 6 2006 7 2007 A JAN B FEB 8 2008 C MAR 9 2009 D APR 0 2010 E MAY 1 2011 F JUN G JUL 2 2012 H AUG J SEP K OCT L NOV 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 A 10 B 11 C 12 D 13 E 14 F 15 H 17 J 18 K 19 L 20 M 21 N 22 P 23 R 24 T 25 U 26 V 27 W 28 X 29 Y 30 Z 31 M DEC G 16 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII www.pletronics.com Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial 425-776-1880 4 TBA4 Series TCVCXO Oscillator February 2009 Mechanical: 4 3 1 2 4 3 2 1 Not to Scale Pad 1 Inches mm A 0.276 + _ 0.006 7.00 + _ 0.15 Function Note B 0.197 + _ 0.006 5.00 + _ 0.15 Vcontrol Input If this function is not specified, recommend connecting this pad to ground. C 0.074 + _ 0.006 1.88 + _ 0.15 D1 0.039 1.00 2 Ground (GND) E1 0.197 5.00 3 Output F1 0.025 0.90 4 Supply Voltage (VCC) G1 0.118 3.00 H1 0.020 0.50 J1 0.051 1.30 K1 0.154 3.90 Recommend connecting appropriate power supply bypass capacitors as close as possible. 1 Contacts : Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches Typic dimensions 1.27 to 8.89 µm There are additional pads on the package bottom, these are not to be connected to any traces on the PCB, solder masking on the PCB should be used to make sure no contact is made. www.pletronics.com 425-776-1880 5 TBA4 Series TCVCXO Oscillator February 2009 Temperature (°C) Reflow Cycle (typical for lead free processing) 260°C Maximum 10 Seconds Maximum 250 215°C±10°C 200 175°C±10°C 150 100 Approximately 50 Seconds 120 to 160 Seconds Allowed rate of temperature change Maximum 4°C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 1.0 S1 Min T Max 0.6 0.6 T1 Max 2.0 +0.05 _ 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 _ +0.1 _0.1 + 24mm P2 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 16 mm 12.1 14.25 7.5 _ +0.1 8.0 + _0.1 8.0 16.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width C mm 13.0 +0.5 / -0.2 D mm 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.0 mm --- --- 24.4 +2.0 -0.0 24.0 mm --- --- 32.4 +2.0 -0.0 32.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 6 TBA4 Series TCVCXO Oscillator February 2009 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 Fax: 425-776-2760 19013 36th Ave. W, Suite H Lynnwood, WA 98036-5761 USA E-mail: [email protected] URL: www.pletronics.com Copyright © 2008, 2009 Pletronics Inc. www.pletronics.com 425-776-1880 7