VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 • Pletronics’ VHA6 Series is a voltage controlled crystal oscillator with a CMOS output. • This model uses fundamental mode crystals with no multiplication circuits. • Tape and Reel or tube packaging is available. • • • • 1.7 to 108 MHz 5x7 mm Ceramic LCC Package Voltage Control Function on pad 1 Enable/ Disable Function on pad 2 Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.2 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +5.5V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2010, Pletronics Inc. VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 Part Number: VHA6029036 E G 500 100 -16.384M -XX Internal code or blank Nominal Frequency in MHz Pullability in ppm (Vcontrol) (value in ppm) 050 = + _ 50 ppm minimum 100 = + _ 100 ppm minimum (typical values shown) Stability in ppm (Stability in ppm * 10) 000 = APR 500 = + _ 50 ppm 250 = + _ 25 ppm (typical values shown) Highest Specified Operating Temperature A = +40oC F = +65oC L = +90oC B = +45oC G = +70oC M = +95oC C = +50oC H = +75oC N = +100oC D = +55oC J = +80oC P = +105oC o o E = +60 C K = +85 C Lowest Specified Operating Temperature A = +10oC E = -10oC J = -30oC B = +5oC F = -15oC K = -35oC o o C = +0 C G = -20 C L = -40oC o o D = -5 C H = -25 C M = -45oC Series (Part Type, Logic & Package) Part Marking: PLE VHA6 FF.FFFM C YMDXX or VHYWWXX FF.FFFM C PXXXXX Legend: P or PLE FF.FFFM YWW or YMD = Pletronics = Frequency in MHz = Date of Manufacture (year and week, or year, month and day) All other marking is internal factory codes Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code Year 0 2010 Code A JAN Month Code Day Code Day Code Day 1 2011 2 2012 B FEB 3 2013 C MAR D APR 4 2014 E MAY F JUN 5 2015 6 2016 G JUL H AUG J SEP K OCT L NOV M DEC 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 A 10 B 11 C 12 D 13 E 14 F 15 G 16 H 17 J 18 K 19 L 20 M 21 N 22 P 23 R 24 T 25 U 26 V 27 W 28 X 29 Y 30 Z 31 www.pletronics.com 425-776-1880 2 VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 Electrical Specification for 3.30V _ +10% over the specified temperature range Item Min Typ Max Unit Frequency Range 1.7 - 108 MHz Frequency Accuracy 1 _ 25 + - - ppm Not specified if APR is specified 25-55 MHz _ 90 + - _ 125 + ppm 1.7-25 MHz _ 110 + - _ 140 + ppm For Vcontrol 1.65 V + _ 1.65 V. Not specified if APR is specified Defined by the part number _ 50 + - - ppm _ 75 + - - ppm Pullability 1 Pullability 1 25-55 MHz 1.7-25 MHz APR Output Waveform Condition Absolute Pull Range, includes the effect of temperature stability Defined by the part number CMOS Output High Level 90 - - % of VCC for IOH= +7 mA 70 - - % of VCC for IOH= +14 mA - - 10 % of VCC for IOL = -7 mA - - 30 % of VCC for IOL = -14 mA - 4.0 6.0 nS 10% to 90% of VCC, CLOAD = 15 pF Output Symmetry 45 50 55 % at 50% point of VCC (See load circuit) Vcontrol Resistance Pin 1 20 25 - Kohm Modulation Bandwidth 10 20 - KHz E/D Internal Pull-up 50 - - Kohm V disable - - 15 % of VCC applied to pin 1 V enable 85 - - % of VCC applied to pin 1 -10 - +10 uA Pin 1 low, device disabled -10 - +10 uA Enable time - - 250 nS Time for output to reach a logic state Disable time - - 250 nS Time for output to reach a high Z state Start up time - 1.5 10 mS Time for output to reach specified frequency Supply Current - 5.0 8.0 mA CLOAD = 15 pF Output Low Level Output TRISE and TFALL Output leakage VOUT = VCC VOUT = 0V Operating Temperature -45 +105 o C Storage Temperature Range -55 +125 o C Vcontrol = 1.65V + _ 1.65V, -3dB to VCC Defined by part number Specifications with Pad 2 E/D open circuit 1 For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures. Typical phase noise plot for 5 oscillators at different output frequencies. www.pletronics.com 425-776-1880 3 VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 0 -20 -40 dBc/Hz -60 12M -80 25M -100 45M 35M 55M -120 -140 -160 -180 10 1,000 100,000 10,000,000 Frequency (Hz) Load Circuit and Test Waveform Symmetry Vhigh 90% * Vcc 50% * Vcc 10% * Vcc Vlow Ground Trise www.pletronics.com 425-776-1880 Tfall 4 VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII www.pletronics.com Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial 425-776-1880 5 VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 Mechanical: Inches A 0.276 + _ 0.006 7.00 + _ 0.15 B 0.197 + _ 0.006 5.00 + _ 0.15 C Contacts: Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm 1 Typical dimensions Not to Scale Pad Function mm 0.073 + _ 0.012 1.87 + _ 0.30 1 D 0.038 0.96 E1 0.200 5.08 F1 0.004 0.10 G1 0.050 1.27 H1 0.055 1.40 I1 0.024 0.60 J1 0.004R 0.10R K1 0.008R 0.20R Note 1 Vcontrol Input 2 Output Enable/ Disable 3 Ground (GND) 4 Output 5 N.C. No Internal connection, pad may be connected to ground or VCC 6 Supply Voltage (VCC) Recommend connecting appropriate power supply bypass capacitors as close as possible. When this pad is not connected, the oscillator shall operate When this pad is logic low, the output will be inhibited (high impedance state) Recommend connecting this pad to Vcc if the oscillator is to be always on Layout and application information For Optimum Jitter Performance, Pletronics recommends: • a ground plane under the device • no large transient signals (both current and voltage) should be routed under the device do not layout near a large magnetic field such as a high frequency switching power supply • do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 6 VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 Reflow Cycle (typical for lead free processing) 260°C Maximum 10 Seconds Maximum Temperature (°C) 250 215°C±10°C 200 175°C±10°C 150 100 Approximately 50 Seconds 120 to 160 Seconds Allowed rate of temperature change Maximum 4°C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 1.0 S1 Min T Max 0.6 0.6 T1 Max 2.0 _ +0.05 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 _ +0.1 _ +0.1 24mm P2 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 16 mm 12.1 14.25 7.5 _ +0.1 8.0 _ +0.1 8.0 16.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width 16.4 +2.0 -0.0 16.0 C mm D mm 13.0 +0.5 / -0.2 16.4 +2.0 -0.0 16.4 +2.0 -0.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 7 VHA6 Series 3.3V VCXO CMOS Oscillator July 2015 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: [email protected] URL: www.pletronics.com Copyright © 2005, 2006, 2010 Pletronics Inc. www.pletronics.com 425-776-1880 8