® Pomona FEATURES: Cable interfaces a BNC based instrument to pin tip jacks. Shielding from BNC to the pin tip breakout area reduces the effect of signal leakage or noise interference. Pin tip plugs are vertically stackable for added test versatility. Pin tip plug and spring are gold plated for low contact resistance to ensure signal integrity. BNC connector center contact is gold plated and the dielectric is PTFE for superior performance. Schematic: Red pin tip plug to BNC center contact, Black pin tip plug to BNC Shell. MATERIALS: BNC: Body Brass, Tarnish Resistant Center Contact: Brass, Gold Plated Dielectric: PTFE Cable: RG58C/U, 50 Ohm Impedance, Capacitance: 30.8 pF/Ft., .195 (5.0mm) O.D. Nom. Color: Black. Marking: POMONA 2882-C-xx Model 2882 BNC (Male) To Stacking Pin Tip Plugs Molded Breakout: PVC molded to the coaxial cable and breakout leads. Color: Black Breakout Leads: 20 AWG, 41 x 36 t.c., .087 (2,21mm) O.D. Color matches pin tip plug Pin Tip Plugs: Body Brass, Gold Plated Spring: Beryllium Copper, Gold Plated Insulation: Polypropylene, molded to the pin tip body and wire. Color: one black, one red. RATING: Operating Voltage: Hand-held Testing: 30VAC/60VDC Max. Hands Free Testing in Controlled Voltage Environments: 500 VRMS Operating Temperature: +50°C (+122°F) ORDERING INFORMATION: Model 2882-C-XX XX = Length in inches, Standard Lengths: 60 (152.40cm) Ordering Ex: 2882-C-60, Cable length is 60 inches long excluding the BNC connector, molded breakout, and pin tip plugs & leads. Additional lengths can be quoted upon request. All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm), .xxx = ± .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS W:\pomona\grponly\Datasheet Updates\Updates 2005\d2882_1_02.doc More drawings available at www.pomonaelectronics.com Page 1 of 1