Pomona ® Model 4225 & 4565 Do-It-Yourself Maxigrabber® Test Clip FEATURES: • Extra long grabber can attach to terminal sizes up to .060” (1,5mm) O.D. • Grabber fits into panel entry openings as small as .250” (6,35mm) diameter. • Hook is gold plated beryllium copper for superb strength and low contact resistance. • Do-It-Yourself feature enables the user to create custom patch cord lengths. • Stainless steel compression spring resists corrosion and retains a firm feel throughout the life of the grabber. SIMPLIFIED ASSEMBLY PROCEDURE: 1. Pull off thumb cap to expose contact connection. 2. Thread wire through the thumb cap and strip wire insulation .125” (3,18mm). 3. Insert stripped end through tapered hole on contact and solder. 4. Slide thumb cap back onto the contact. MATERIALS: Contact: Beryllium Copper, Gold Plated Spring: Stainless Steel Insulation: Nylon 6, Marking: “POMONA ELECTRONIC 4225” or “POMONA ELECTRONIC 4565” RATINGS: Operating Voltage: 300 VRMS Operating Temperature: +102°C (+216°F) Current: 5 Amperes ORDERING INFORMATION: Models 4225-*, 4565-* * = Color, Standard Colors: -0 Black, -2 Red All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d4225_4565_1_01.doc PomonaACCESS 90391 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1