Pomona® Model 4826 Minigrabber® Test Clip With Pin Jack FEATURES: • This Minigrabber® test clip has a pin jack built right into the plunger. • Excellent for attaching the Grabber test clip directly to the end of a pin tip patch cord or it can be used as an adapter for miniature test probes with 2.0 (,080) tips. MATERIALS: Contact: Beryllium Copper per QQ-C-533, Alloy 165. Spring: Stainless steel, 302 Pin Tip Jack : Brass per QQ-B-626, Alloy 360, ½ Hard. Pin Tip Jack Spring: Beryllium Copper, Berylco 25 per QQ-C-533, Cond. HT. Finish: Contact: Gold plated per MIL-G-45204, Class 00 Pin Tip Jack: Gold plated per MIL-G45204,Type II, Class 00 over electroless nickel per MIL-C-26074, Class 1, 200/300 microinches. Insulation: Glass filled Nylon: Marking: “POMONA ELECTRONICS, CALIF.” “4826” “MINIGRABBER®”, RATINGS: Operating Temperature: +102°C. (+216°F) Max. Operating Voltage: 30VAC/60VDC Current: 5 Amperes ORDERING INFORMATION: Model 4826-* *=Color, -0 Black, -2 Red, -9 White Ordering Example: 4826-2 Adapter Color is Red. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d4826_1_01.doc PomonaACCESS 90607 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1