® Pomona FEATURES: Accepts .080 dia. pin Max. panel thickness .25. MATERIALS: Pin Jack Insulation: Polycarbonate molded to Pin Jack Body. Panel Insulator: Polycarbonate. Color matches color of Pin Jack insulation. Lockwasher #8 Internal Tooth: Steel. Finish: Nickel plated per QQN-290, latest revision, Class 2, 200/300 miscoinches Hex Nut #8-32: Brass. Finish: Nickel plated per QQN-290, latest revision, Class 2, 200/300 microinches. Pin Jack Body: Nickel Plated Brass latest revision, Alloy 360, ½ Hard. Spring: Gold Plated Beryllium Copper, Berylco 25 per QQC-533, latest revision, Cond. HT. Finish: Body Electroless nickel plated per MILC-26074, latest revision, Class 2, 200/300 microinches. Model 4773 Insulated Pin Jack, Miniature With Wrapped Wire Terminal Spring Gold plated per MIL-G-45204, latest revision Type II, Class 00 over electroless nickel per MIL-C-26074, latest revision, Class 1, 200/300 microinches. Wrapped Wire Terminal: Gold Plated Phosphor Bronze Finish: Gold plated per MIL-G-45204, latest revision, Type II, Class 00 over electroless nickel per MIL-C-26074, latest revision, Class 1, 200/300 microinches. RATINGS: Operating Temperature: +115°C. (+239°F.) Max. Operating Voltage: 1500 VDC Current: 3 Amperes ORDERING INFORMATION: Model 4773-* * = Color, Standard Colors: -0 Black, -2 Red, -6 Blue, -9 White All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm), .xxx = ± .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS W:\pomona\grponly\Datasheet Updates\Updates 2005\d4773_1_02.doc More drawings available at www.pomonaelectronics.com Page 1 of 1