Model 6364 Replacement Tips For 080 Series Test Probes FEATURES: Model 6364 contains ten pieces of the probe tips below see table for quantities. Model 4988 Stainless Steel Needle Tip Model 4174 Stainless Steel Industrial Tip •Hardened stainless steel for precision pointing •Sharp, fine tapered tip will pierce conformal coatings and heavy surface contamination Model 5688 Replacement Probe Tip •Rigid, hardened stainless steel for heavy duty use •Sharp tapered point for piercing heavy surface contamination or paint Model 5133 Dogleg Micro-Tip •Rigid, Nickel-plated brass is perfect for precision voltage and resistance measurements •Best tip for everyday use •Groove at the tip helps maintain positive contact on test points •Very sharp stainless steel for use on densely populated circuit boards •Flexible tip helps to maintain contact with test points •Sharp point will pierce surface contamination Probe Tip Description Standard, Nickel-Plated Brass Body Dia. .080" Tip Dia. .080" Part Number 5688 6364 Kit Contents 4 each Stainless Steel Micro-Tip 2 each .080" .040" 5133 Stainless Steel Industrial Point 2 each .080" .080" 4174 Stainless Steel Needle Point 2 each .080" .028" 4988 MATERIALS: Hardened Stainless Steel and Nickel Plated Brass RATINGS: 10 Amperes, Model 5688 & 4988, 5 Amperes, Model 5133 & 4174 ORDERING INFORMATION: Full Kit: Model 6364 All dimensions are in inches and metric. All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 11/12/01 SY/EH/LS Last saved by JS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 S:\Engineering\Release\DataSheet \Market_01\D6364_1_02.doc PomonaACCESS 90731 (800) 444-6785 or (909) 469-2991 More drawings available at www.pomonaelectronics.com Page 1 of 1