POMONA 6475

Model 6475
Test Probe Tips For
060 Series Probes
FEATURES:
Model 6475 is a set of two each of the following five probes that fit Pomona probes that use the 0.060 inch ((1.52mm)
diameter test probe tips.
Sharp Stainless-Steel Tip
• Rigid stainless-steel tip is hardened for heavy
duty use
• Sharp, hardened point will penetrate conformal
coatings and heavy surface contamination
•
Nickel Plated Brass Tip
• Rigid nickel plated brass tip is perfect for
precision measurement
• Sharp tip resists wear
• This is the best tip for every day use
•
Triple Point Micro Tip
• Gold plated pogo pin tip has .018” diameter
Tip with three sharp points
• Sharp point digs into soft metals like solder for
low resistance connections
• Self-cleaning tip pierces surface coatings or
contamination
Sharp Point Tip
• Pogo pin helps to hold the test point even if the
probe is moved
•
•
Gold plated pogo pin tip has a sharp tapered
point
Sharp point digs into soft metals like solder for
low resistance connections
Self-cleaning tip pierces surface coatings or
contamination
Pogo pin helps to hold the test point even if the
probe is moved
Triple Point Tip
• Gold plated pogo pin tip has three sharp points
• Sharp point digs into soft metals like solder for
low resistance connections
• Self-cleaning tip pierces surface coatings or
contamination
• Pogo pin helps to hold the test point even if the
probe is moved
All dimensions are in inches and metric. All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
2/1/06 SY/EH/LS
Sales: 909-469-2900 Fax: 909-629-3317
Technical Assistance: 800-241-2060
Last saved by Hyland
C:\Documents and Settings\Charina Songalia\Local Settings\Temporary Internet Files\OLK545\D6475_2_03.doc
PomonaACCESS 90888 (800) 444-6785 or (909) 469-2991
More drawings available at www.pomonaelectronics.com
Page 1 of 2
Model 6475
Test Probe Tips For
060 Series Probes
MATERIALS:
Pogo-pin Tips: Gold Plated Beryllium Copper
Rigid Tips: Stainless-Steel or Nickel Plated Brass
RATINGS:
Maximum Current: 5 Amperes
ORDERING INFORMATION: Full Kit: Model 6475
All dimensions are in inches and metric. All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
2/1/06 SY/EH/LS
Sales: 909-469-2900 Fax: 909-629-3317
Technical Assistance: 800-241-2060
Last saved by Hyland
C:\Documents and Settings\Charina Songalia\Local Settings\Temporary Internet Files\OLK545\D6475_2_03.doc
PomonaACCESS 90888 (800) 444-6785 or (909) 469-2991
More drawings available at www.pomonaelectronics.com
Page 2 of 2