Pomona ® Model 6383 Banana Plug, User Installed (18-22 AWG) FEATURES: • Attaches to your wire with commonly available crimp tools or by soldering. • Can be used on stranded wire from 18 to 22 AWG with an insulation diameter from 0.060” to 0.150”. • Provides safe and secure connections to 4mm shrouded banana jacks recessed for shrouded plugs. • Compatible with most digital multimeters from Fluke, Wavetek, Agilent, Amprobe, Greenlee and others. • Will comply with IEC1010 CAT II, 300V when properly assembled. MATERIALS: Banana Plug: Nickel plated Brass and Beryllium Copper. Insulation: Santoprene (Thermoplastic Elastomer). RATINGS: Operating Voltage: 300V Max. (Hand Held); 1,500V Max. (Non-Hand Held) Current: 5 Amperes 20-22 AWG, 15 Amperes 18 AWG Operating Temperature: -20°F to 275°F (-29°C to 135°C) Storage: -40°F to 302°F (-40°C to 150°C) ORDERING INFORMATION: Model 6383-(*). * = Color, (-0) Black, (-2) Red, (10 per package). (-02) 1 of each color. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d6383_2_01.doc PomonaACCESS 90835 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Last saved by PN Page 1 of 2 Pomona ® Model 6383 Banana Plug, User Installed (18-22 AWG) FIGURE #1 A. Slide plastic housing over wire. B. Place stripped wire (18, 20, or 22 AWG) end into terminal hole. FIGURE #2 C. Crimp terminal using a bare-terminal style crimper. Retention force of joint should exceed 12 pounds to assure no damage occurs to joint when housing is snapped into place. FIGURE #3 D. Slide housing over plug and pull on wire until snap engages. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d6383_2_01.doc PomonaACCESS 90835 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Last saved by PN Page 2 of 2