Model 6477 Replaceable Tip Test Probe Set FEATURES: • • • • • • Replaceable tip probe set with sharp stainless steel 0.06 inch (1.52mm) diameter tip included. (Other tips are available, see model 6475.) Designed for most DMM’s including Fluke, Wavetek Meterman, Amprobe, and others with safety-sheath banana jack inputs Thermoplastic elastomer outer coat provides comfortable grip and flexible strain relief Probe and banana plug are molded directly onto the wire for robust pull strength Wire is a high strand count silicone wire for extreme flexibility and high temperature resistance Banana plug spring is nickel plated Beryllium Copper for long insertion life MATERIALS: Probe: Outer Insulation: Santoprene® rubber, color: gray Inner Insulation: Polypropylene, color: one black, one red Tip: sharp stainless steel Wire: 18 AWG Banana Plug: Nickel plated Brass Spring – Nickel plated Beryllium Copper Plug Insulation: Polypropylene, color: one black, one red RATINGS: IEC 1010-2-031, Category III 1000V Operating Voltage: 1000 VRMS Current: 5 Amperes ORDERING INFORMATION: Model 6477 Includes a set of one black and one red test lead with two replaceable tips All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 2/1/06 SY/EH/LS Sales: 909-469-2900 Fax: 909-629-3317 Technical Assistance: 800-241-2060 Last saved by Hyland C:\Documents and Settings\Charina Songalia\Local Settings\Temporary Internet Files\OLK545\D6477_1_03.doc PomonaACCESS 90916 (800) 444-6785 or (909) 469-2991 More drawings available at www.pomonaelectronics.com Page 1 of 1