Model 6479 Stainless Steel Sharp Tip Probe Set Model 6479 Stainless Steel Sharp Tip Modular Probe Qty 2 -1 Red, 1 Black FEATURES: 9 Designed to meet IEC 1010-2-31, the latest international safety standard for test accessories. 9 Heavy-duty stainless steel tip has a sharp point for piercing paint, conformal coatings, surface contaminants and wire insulation. 9 Probe tip mates into standard 0.080” pin jacks. 9 Probe uses a 4mm double insulated banana jack to accept modular style test leads, such as Pomona models 5907A, 5908A, 5909A, 6358 and 6467. MATERIALS: Probe Body: Black or Red Polypropylene Tip: Hardened stainless steel, sharp point .080” (2mm) tip Jack: Nickel plated brass, .166 (4mm) safety style sheathed banana jack RATINGS: IEC 1010-2-031, Category III Operating Voltage: 1000 Vrms/DC Current: 10 Amperes ORDERING INFORMATION: Model# 6479 (Set includes one black and one red probe) Probes can be used with the following Pomona CE test lead sets: 5907A Straight banana plug to right-angle banana plug test lead set; length 48” (122.0cm) 5908A Straight banana plug to straight banana plug test lead set; length 48” (122.0cm) 5909A Right-angle banana plug to right-angle banana plug test lead set; length , 48” (122.0cm) 6358 Straight banana plug to Retractable sheath banana plug test lead set; length 48” (122.0cm) 6467 Straight banana plug to Stacking banana plug test lead set; length 48” (122.0cm) * For data sheets / specifications of the kit individual components, visit the Pomona web site at: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1096687 Page 1 of 2 Model 6479 Stainless Steel Sharp Tip Probe Set All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1096687 Page 2 of 2