Model 6479 Stainless Steel Sharp Tip Probe Set Model 6479 Stainless Steel Sharp Tip Modular Probe Qty 2 -1 Red, 1 Black FEATURES Designed to meet IEC 61010-031, the latest international safety standard for test accessories. Heavy-duty stainless steel tip has a sharp point for piercing paint, conformal coatings, surface contaminants and wire insulation. Probe tip mates into standard 0.080” pin jacks. Probe uses a 4mm double insulated banana jack to accept modular style test leads, such as Pomona models 5907A, 5908A, 5909A, 6358 and 6467. MATERIALS Probe Body: Tip: Jack: Black or Red Polypropylene Hardened stainless steel, sharp point .080” (2mm) tip Nickel plated brass, .166” (4mm) safety style sheathed banana jack RATINGS Operating Voltage: IEC 61010-031, CAT III 1000V (with protective cap), CAT II 1000V (without protective cap) Current: 10 Amperes ORDERING INFORMATION Model 6479 (Set includes one black and one red probe) Probes can be used with the following Pomona CE test lead sets: 5907A Straight banana plug to right-angle banana plug test lead set; length 48” (122.0cm) 5908A Straight banana plug to straight banana plug test lead set; length 48” (122.0cm) 5909A Right-angle banana plug to right-angle banana plug test lead set; length , 48” (122.0cm) 6358 Straight banana plug to Retractable sheath banana plug test lead set; length 48” (122.0cm) 6467 Straight banana plug to Stacking banana plug test lead set; length 48” (122.0cm) USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1096687 Rev. 101 Page 1 of 1