Model 6486 Telecom Bed of Nails to Bantam Plug FEATURES: • Multi-purpose test clips allow four ways to connect to a device under test o U-shaped nose for blade shaped terminals o Notched jaw for gripping screw heads, bare wire or terminals o Serrated teeth for gripping threaded or wire wrapped terminals o Cluster of sharp needles for piercing small gauge wires (#22-28 AWG) MATERIALS: Jaws: Non-rusting Nickel Copper Alloy. Boot: Vinyl Wire: 20 AWG PVC Cable: 2 conductor, 22 AWG, 7 x 30 tc, .180” outside diameter Y Mold: PVC Bantam: Miniature phone plug 3 conductor, sleeve no connection RATINGS: Operating Voltage: Hand-held 30 VAC/60 VDC Hands free operation in a controlled voltage environment: 300 VRMS Current: 5 Amperes ORDERING INFORMATION: Model 6486-60 Standard Length = 60” (1524,0) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 7/10/02 SY/EH/LS Last saved by Laura Goldberg Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet \d6486_1_02.doc PomonaACCESS 90952 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1