Model 6490 20mm Tip Reach, SMD Grabber Test Clip FEATURES: Use with SOIC, PLCC & PQFP packages with .5mm lead pitch or greater. 20mm long tip allows measurement at IC leads that are not easily accessible. Thin body style allows an unlimited number of clips to be stacked side by side. Maximum frequency is 100 MHz. MATERIALS: Leads: Music Wire Tip Tubing: Insulated Stainless Steel Body: Nylon Flying Lead connection: Gold plated copper RATINGS: Operating Voltage: Hands free usage in controlled voltage environments: 70 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. ORDERING INFORMATION: Model 6490-Color Color =: 0 (Black), 1 (Brown), 2 (Red), 3 (Orange), 4 (Yellow), 5 (Green), 6 (Blue), 7 (Violet), 8 (Gray), 9 (White) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094898 Page 1 of 2 Model 6490 20mm Tip Reach, SMD Grabber Test Clip All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094898 Page 2 of 2