Model 6544 Rigid Back Probe Pin FEATURES: Test tip adapter has been designed to IEC 1010, which is the latest international safety standard. Snaps onto Pomona’s DMM Probes with .080" (2 mm) O.D. Tips, such as model 5519A. Adapter allows access to hard to reach test points. Tip is insulated to the point to prevent shorting of adjacent components. MATERIALS: Tip: Stainless Steel Tip Insulation: Kynar Body: Polypropylene, Fire Retardant, UL94 V-2 Rated, Color: One Red, One Black RATING: IEC 1010-2-031, Category II, P2 Compliant Operating Voltage: 300 Vrms/DC Current: 3 Amperes. ORDERING INFORMATION: Model 6262-02 (set of one black and red probe) Model 6262-0 (black probe only) Model 6262-2 (red probe only) Ordering example: 6262-2 (red probe) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094734 Page 1 of 1