Model 6573A Alligator Clip With Boot for sheathed banana plug, .166” (4mm) (banana plug not included) FEATURES: Complies with International Safety Standard IEC 1010-2-031 Alligator will clip around terminals up to .30” (7,62mm) outside diameter. Attaches to standard .166” (4mm) sheathed banana plugs, such as Pomona model 5907A test leads. MATERIALS: Alligator Clip: Nickel plated steel Boot: Santoprene rubber RATINGS: Operating Voltage: 1,000V, Category III Current: 10 Amperes Temperature: -13 to 176 F (-25 to 80 C) ORDERING INFORMATION: 6573A-0 (one alligator clip with black boot) 6573A-2 (one alligator clip with red boot) 6573A-02 (two alligator clip, one red and one black boot) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1096779 Page 1 of 2 Model 6573A Alligator Clip With Boot for sheathed banana plug, .166” (4mm) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1096779 Page 2 of 2