Model 6705 Isolated BNC F/F Panel Connector for HDTV Features: True 75 ohm impedance. Designed to meet the rigid standards for HDTV. Panel isolated with black nickel plating for easily identification as an HDTV connector. Connectors are precision machined (not die-cast) from brass. Insulator material is high density PTFE to maintain a perfect dielectric constant. Connectors utilize gold plated contact pin to maintain low return loss in high definition applications. Materials: Connector Body: Outer Contact: Female Contact Pin: Insulator: Ratings: Black nickel plated brass Nickel plated brass Gold plated brass Polytetrafluorethylene (PTFE) Impedance: Frequency: VSWR: Insertion Loss: Leakage Loss: Contact Resistance: Insulation Resistance: Insertions: Temperature: 75 ohms 0 to 3 GHz. 1.3 max 0.2 db (@ 3GHz.) -55 db (@ 3GHz.) 3 Milliohms 5,000 Megohms 500 -40 F to 185 F (-40 C to +85 C) Operating Voltage: Hands free usage in controlled voltage environments: 500 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1099638 Page 1 of 1