® Model 6712 F Type 90 Degree Adapter, Female to Male Features: Adapter maximizes space behind equipment by allowing cable attachment at 90 degrees. Adapter decreases stress to cable and connecter assembly when a 90 degree connection is required. Adapter is precision machined (not die-cast) from brass. Materials: Connector Body Center Contact Insulator (f) Insulator (m) Nickel plated brass Nickel plated brass Polystyrene Polybutylene Terephthalate Ratings: Impedance: Frequency: VSWR: Contact Resistance: Voltage Insulation Resistance: Insertions: Temperature: 75 Ohms 0 to 500 MHz 1.5 max 3 Milliohms max. * 500 V 5,000 Megohms min. 500 -40 to +65° C * Hands free testing in controlled voltage environment: For CE compliance: not intended for hand held use at voltages above 33 Vrms / 70 Vdc. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 001 D1099681 Page 1 of