Models 72907 Mini SMD Grabber Test Clip with Lead and 2mm Jack Test lead with Mini Smd Grabber Test Clip to 2mm Jack Specifications Features • Mini SMD Grabber Test Clip (Pomona 72906) with 20 inch (50cm) lead and 2mm Jack. (Black) Materials • • • • • Connector Body is Nickel plated Brass. Connector insulation is Polypropylene 0.8mm Socket is Gold over Nickel plated Brass. Insulation of 0.8mm is Elastomere Wire is Silicone. Ordering Information Max Current Max. 1A Max Voltage 33 V AC / 70 V DC Temperature Rating -20˚ C + 80˚ C Max Resistance Less than 8 mΩ Rating: hands free testing in controlled environment: 70Vrms max. For CE compliance: Not intended for handheld use at voltages above 33Vrms/70Vdc Model: 72907-20-Color Available Colors: Black (-0), Red (-2) USA: Sales: 800-490-2361 Technical Support: 800-2412060 Fax: 888-403-3360 Europe: 31-(0) 40 2675 150 International: 425-446-5500 e-mail: [email protected] Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2004 1/20/06 72907 Rev A Page 1 of 1 Page 1 of