Models 72923 SMD Test Probe W/ Sharp, Spring Mounted Tip, 2MM Features • • • • • SMD test probe with sharp, spring mounted tip and 2mm jack Provides ultra-fine control for probing high density SMD circuits Very fine 0.03in (0.7mm) diameter stainless steel tip is spring-mounted for controlled pressure Removable, clear IC insulator cap prevents shorting of adjacent IC loges. Sheathed 2mm receptacle adapts to 2mm test leads and adapters. Materials • • • • Probe Body: Brass Probe Tip: Steel Insulation: Polypropylene Cap Insulation: Polypropylene Specifications Max Current Max. 1A Max Voltage 600 V Cat III Ordering Information Temperature -20˚ C + 80˚ C Model:72923-Color Available colors: Black (-0), or Red (-2) Max Resistance Less than 5 mΩ USA: Sales: 800-490-2361 Technical Support: 800-2412060 Fax: 888-403-3360 Europe: 31-(0) 40 2675 150 International: 425-446-5500 e-mail: [email protected] Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2004 2/06 72923 Rev A Page 1 of 1