Model 72945 SMA PLUG STRAIGHT CRIMP, RG142, 400 High bandwidth, small size, and durability for confident connections Features • DC – 12.4 GHz • Meets MIL-C-39012, IEC 169-15, CECC 22110. • Small size and durability for mobile communications. • Precision machined and gold-plated for low loss. Materials Specifications Impedance 50 Frequency Range 0-12.4 GHz Working Voltage < 500 Vpeak Dielectric Withstanding Voltage 1,000 Vrms VSWR 1.35 max. Center/Outer Contact Resistance 0.003/0.002 max • Body is machined brass with gold plating. • Center Contacts - Plug is gold plated brass and Jack is gold plated Beryllium copper. Insulation resistance > 5000 M • Insulators are high quality PTFE. Number of Insertions 500 cycles minimum • Crimp Ferrules are copper with gold or nickel plating. Temperature Range -65˚ C to 165˚ C, -85˚ F to 329˚ F • Gaskets are silicone rubber. Information Model: 72945 Description: SMA PLUG STRAIGHT CRIMP, RG142, 400 USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003386 REV 001 Copyright © 2007 11/09/2007 Page 1 of 2 Cable Types and Crimp Die Information Connector Model # 72945 Cable Groups RG 142, 400 Crimp Die Cavity Size for Outer Ferrule .230 (5.9) Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003386 REV 001 Copyright © 2007 11/09/2007 Page 2 of 2