Model 72954 SMA JACK STRAIGHT CRIMP, RG174, 188, 316 High bandwidth, small size, and durability for confident connections Features • DC – 12.4 GHz bandwidth. • Meets MIL-C-39012, IEC 169-15, CECC 22110. • Small size and durability for mobile communications. • Precision machined and gold-plated for low loss. Materials Specifications Impedance 50 Frequency Range DC – 12.4 GHz max. Working Voltage < 375 Vpeak • Body is machined brass with gold plating. • Center Contacts - Plug is gold plated brass and Jack is gold plated Beryllium copper. Dielectric Withstanding Voltage 1,000 Vrms • Insulators are high quality PTFE. VSWR 1.35 max. • Crimp Ferrules are copper with gold or nickel plating. Center/Outer Contact Resistance 0.003/0.002 Insulation resistance > 5000 M Number of Insertions 500 cycles minimum Temperature Range -65˚ C to 165˚ C, -85˚ F to 329˚ F • Gaskets are silicone rubber. Information Model: 72954 Description: SMA JACK STRAIGHT CRIMP, RG174, 188, 316 USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com max All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003391 REV 001 Copyright © 2007 11/09/2007 Page 1 of 2 Cable Types and Crimp Die Information Connector Model # 72954 Cable Groups RG 174, 188, 316 Crimp Die Cavity Size for Outer Ferrule .128 (3.3) Cable Assembly Instructions USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm), .xxx = ± .005” (.127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. D2003391 REV 001 Copyright © 2007 11/09/2007 Page 2 of 2