PO74G16241A 16-BIT BUFFERS/ DRIVERS WITH 3-STATE OUTPUTS 03/18/08 74 Series GHz Logic FEATURES: DESCRIPTION: . Patented technology . Operating frequency up to 1.125GHz with 2pf load . Operating frequency up to 700MHz with 5pf load . Operating frequency up to 300MHz with 15pf load Potato Semiconductor’s PO74G16241A is designed for world top performance using submicron CMOS technology to achieve 1.125GHz TTL /CMOS output frequency with less than 1.5ns propagation delay. This Octal bus buffer gate is designed for 1.65-V to 3.6-V VCC operation. . Operating frequency up to 100MHz with 50pf load . VCC Operates from 1.65V to 3.6V . Propagation delay < 1.5ns max with 15pf load . Low input capacitance: 4pf typical . Available in 48pin TSSOP package The PO74G16241A features independent line driver swith 3-state outputs. Each output is disabled when the associated output- enable input is high or low. Pin Configuration Logic Block Diagram 1OE 1 48 2OE 1Y1 2 47 1A 1 1Y2 3 46 1A 2 GND 4 45 GND 1Y3 5 44 1A 3 1Y4 6 43 1A 4 VCC 7 42 VCC 2Y1 8 41 2A 1 2Y2 9 40 2A 2 GND 10 39 GND 2Y3 11 38 2A 3 2Y4 12 37 2A 4 3Y1 13 36 3A 1 3Y2 14 35 3A 2 GND 15 34 GND 3Y3 16 33 3A 3 3Y4 17 32 3A 4 VCC 18 31 VCC 4Y1 19 30 4A 1 4Y2 20 29 4A 2 GND 21 28 GND 4Y3 22 27 4A 3 4Y4 23 26 4A 4 4OE 24 25 3OE Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V/5V system environment. 1OE 1A1 1A2 1A3 1A4 2OE 2A1 2A2 2A3 2A4 1 3OE 47 2 46 3 44 5 43 6 1Y 1 3A1 1Y 2 3A2 1Y 3 3A3 1Y 4 3A4 48 4OE 41 8 40 9 38 11 37 12 2Y 1 4A1 2Y 2 4A2 2Y 3 4A3 2Y 4 4A4 25 36 13 35 14 33 16 32 17 3Y1 3Y2 3Y3 3Y4 24 30 19 29 20 27 22 26 23 4Y1 4Y2 4Y3 4Y4 Pin Description Inputs OE, 4OE 1A, 4A H L L L H X Outputs 1Y, 4Y H L Z Inputs 2OE, 3OE 2A, 3A H H H L L X Outputs 2Y, 3Y H L Z 1 Copyright © Potato Semiconductor Corporation PO74G16241A 16-BIT BUFFERS/ DRIVERS WITH 3-STATE OUTPUTS 03/14/08 74 Series GHz Logic Maximum Ratings Description Max Unit Storage Temperature -65 to 150 °C Operation Temperature -40 to 85 °C Operation Voltage -0.5 to +4.6 V Input Voltage -0.5 to +5.5 V Output Voltage -0.5 to Vcc+0.5 V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description VOH Output High voltage VOL Test Conditions Min Typ Max Unit Vcc=3V Vin=VIH or VIL, IOH= -12mA 2.4 3 - V Output Low voltage Vcc=3V Vin=VIH or VIL, IOH=12mA - 0.3 0.5 V VIH Input High voltage Guaranteed Logic HIGH Level (Input Pin) 2 - 5.5 V VIL Input Low voltage Guaranteed Logic LOW Level (Input Pin) -0.5 - 0.8 V IIH Input High current Vcc = 3.6V and Vin = 5.5V - - 1 uA IIL Input Low current Vcc = 3.6V and Vin = 0V - - -1 uA VIK Clamp diode voltage Vcc = Min. And IIN = -18mA - -0.7 -1.2 V Notes: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25 °C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current 2 Copyright © Potato Semiconductor Corporation PO74G16241A 16-BIT BUFFERS/ DRIVERS WITH 3-STATE OUTPUTS 03/14/08 74 Series GHz Logic Power Supply Characteristics Symbol Description Test Conditions (1) Min Typ Max Unit IccQ Quiescent Power Supply Current Vcc=Max, Vin=Vcc or GND - 0.1 30 uA ∆Icc Power Supply Current per Input High Vcc=Max, Vin= Vcc-0.6V - 50 300 uA Notes: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25°C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current Capacitance Parameters (1) Cin Cout Description Test Conditions Typ Unit Input Capacitance Vin = 0V pF Output Capacitance Vout = 0V 4 6 Test Conditions (1) M ax Unit pF Notes: 1 This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol Description tPLH Propagation Delay A to Y CL = 15pF 1.5 ns tPHL Propagation Delay A to Y CL = 15pF 1.5 ns tPZH or tPZL Output Enable Time CL = 15pF 2.5 ns tPHZ or tPLZ Output Disable Time CL = 15pF 2.5 ns tr/tf Rise/Fall Time 0.8V – 2.0V fmax Input Frequency CL = 50 pF 0.8 100 ns MHz fmax Input Frequency CL =15pF 300 MHz fmax fmax Input Frequency CL = 5pF 750 MHz Input Frequency CL = 2pF 1125 MHz Notes: 1. See test circuits and waveforms. 2. tpLH, tpHL, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested. 3. Airflow of 1m/s is recommended for frequencies above 133MHz 3 Copyright © 2005-2006, Potato Semiconductor Corporation PO74G16241A 16-BIT BUFFERS/ DRIVERS WITH 3-STATE OUTPUTS 03/14/08 74 Series GHz Logic Test Waveforms Test Circuit 500 Ω 50Ω 50pF to 2pF 50 Ω 500 Ω 4 Copyright © Potato Semiconductor Corporation PO74G16241A 16-BIT BUFFERS/ DRIVERS WITH 3-STATE OUTPUTS 03/14/08 74 Series GHz Logic Packaging Mechanical Drawing: 48 pin TSSOP 48 .236 .244 1 .319 8.1 .488 12.4 .496 12.6 .004 0.09 .008 0.20 .047 1.20 Max .0197 0.50 .018 0.45 .030 0.75 6.0 6.2 .007 .010 0.17 0.27 .002 .006 0.05 0.15 X.XX X.XX DENOTES DIMENSIONS IN MILLIMETERS 5 Copyright © Potato Semiconductor Corporation PO74G16241A 16-BIT BUFFERS/ DRIVERS WITH 3-STATE OUTPUTS 03/14/08 74 Series GHz Logic Ordering Information Ordering Code Package Top-Marking TA PO74G16241ASU 48pin TSSOP Tube Pb-free & Green PO74G16241AS -40°C to 85°C PO74G16241ASR 48pin TSSOP Tape and reel Pb-free & Green PO74G16241AS -40°C to 85°C IC Package Information PACKAGE CODE T PACKAGE TYPE TSSOP 48 TAPE WIDTH (mm) 24 TAPE PITCH (mm) 12 PIN 1 LOCATION Top Left Corner TAPE TRAILER LENGTH 26 (12”) QTY PER REEL 1500 TAPE LEADER LENGTH 43 (20”) QTY PER TUBE 39 6 Copyright © Potato Semiconductor Corporation