DC-DC Converter UNIT 1R Serie ( 1W SINGLE OUTPUTS WITH REGULATION ) FEATURES z z 1000VDC ISOLATION HIGH EFFICIENCY INTERNAL FILTERING LOW COST NO EXTERNAL COMPONENTS REQUIRED UP TO 1W REGULATED OUTPUT POWER SINGLE IN LINE PACKAGE 100% BURNED IN z z LOW NOISE MTBF > 800,000 HOURS z OUTPUT SPECIFICATIONS z z z z z z Voltage Set point Accuracy +/-0.03%/ OC Input Filter Ripple & Noise (20MHz BW) Capacitor Type +/-0.5% max 2 +/-0.5% max z GENERAL SPECIFICATIONS Current Limit Protection Efficiency Short Circuit Restart z +/-10% max 100mVp-p max Line Regulation1 Short Circuit Protection INPUT SPECIFICATIONS +/-2% max Input Voltage Range Temperature Coefficient Load Regulation z Automatic Isolation Voltage ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Cooling 60% min 3 Isolation Resistance 1000 VDC min 9 10 ohms min -25 OC to +71 OC Switching Frequency 50 KHz min -55 OC to +125 OC Isolation Capacitance 80pF max Free-Air Convection MTBF Weight ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25 OC UNLESS OTHERWISE 800,000 Hours 7.0g Typ Case Material Non-Conductive Plastic Case Size 31.8mm*8.6mm*14.5mm NOTED. 1 High Line to Low Line. 2 Load Regulation is for output load current change from 10% to 100%. 3 For 60 seconds www.Power-Systems.de Page: 1 / 5 Version: 4-Oct-02 DC-DC Converter UNIT 1R Serie ( 1W SINGLE OUTPUTS WITH REGULATION ) z SELECTION GUIDE 1W OUTPUT MODEL NUMBER INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT (VDC) (VDC) (mA) INPUT CURRENT(mA) EFF ISOLATION FULL NO (%) (VDC) LOAD LOAD 1RS-0505 4.5-5.5 5 200 322 23 62 1000 1RS-0509 4.5-5.5 9 111 333 22 60 1000 1RS-0512 4.5-5.5 12 84 322 22 62 1000 1RS-0515 4.5-5.5 15 67 322 21 62 1000 1RD-0505 4.5-5.5 +/-5 +/-100 322 23 62 1000 1RD-0512 4.5-5.5 +/-12 +/-42 322 22 62 1000 1RD-0515 4.5-5.5 +/-15 +/-34 322 21 62 1000 1RS-1205 10.8-13.2 5 200 124 15 67 1000 1RS-1209 10.8-13.2 9 111 134 15 62 1000 1RS-1212 10.8-13.2 12 84 130 15 64 1000 1RS-1215 10.8-13.2 15 67 132 15 63 1000 1RD-1205 10.8-13.2 +/-5 +/-100 124 15 67 1000 1RD-1212 10.8-13.2 +/-12 +/-42 130 15 64 1000 1RD-1215 10.8-13.2 +/-15 +/-34 132 15 63 1000 1RS-2405 21.6-26.4 5 200 61 7 68 1000 1RS-2409 21.6-26.4 9 111 64 6 65 1000 1RS-2412 21.6-26.4 12 84 60 6 70 1000 1RS-2415 21.6-26.4 15 67 60 6 70 1000 1RD-2405 21.6-26.4 +/-5 +/-100 61 7 68 1000 1RD-2412 21.6-26.4 +/-12 +/-42 60 6 70 1000 1RD-2415 21.6-26.4 +/-15 +/-34 60 6 70 1000 Note: Other input to output voltages may be available. Please contact factory. www.Power-Systems.de Page: 2 / 5 Version: 4-Oct-02 DC-DC Converter UNIT 1R Serie ( 1W SINGLE OUTPUTS WITH REGULATION ) SIMPLIFIED SCHEMATIC z SINGLE OUTPUT +Vin REGULATOR DUAL OUTPUT +Vout OSCILLATOR DRIVER -Vin REGULATOR +Vin OSCILLATOR DRIVER -Vout +Vout Com. -Vout -Vin REGULATOR z MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS www.Power-Systems.de Page: 3 / 5 PIN SINGLE DUAL 1 +Vin +Vin 2 NC -Vout 3 NC NC 9 NC NC 10 -Vout Common 11 +Vout +Vout 12 -Vin -Vin Version: 4-Oct-02 DC-DC Converter UNIT 1R Serie ( 1W SINGLE OUTPUTS WITH REGULATION ) z TYPICAL APPLICATIONS SINGLE OUTPUT INPUT DUAL OUTPUT OUTPUT INPUT OUTPUT +Vout +Vin +Vin +Vout LOAD1 -Vin Common LOAD DC-DC CONVERTER DC-DC CONVERTER -Vin -Vout LOAD2 -Vout z TYPICAL PERFORMANCE CUREVES Specifications typical at ta=25 OC,nominal input voltage , rated output current unless otherwise specified. OUTPUT LOAD vs EFFICIENCY OUTPUT LOAD vs OUTPUT VOLTAGE 10% OUTPUT VOLTAGE CHANGE(%) EFFICIENCY(%) 100% 80% SAFE OPERATING AREA 60% 40% 20% 0% 0% 20% 40% 60% 80% 5% 0% -5% -10% 0% 100% 20% OUTPUT LOAD(%) TEMPERATURE DERATING 60% 80% 100% INPUT VOLTAGE vs EFFICIENCY 100% EFFICIENCY(%) 1.2 OUTPUT POWER(W) 40% OUTPUT LOAD(%) 0.9 0.6 0.3 0.0 -25 0 25 50 70 100 80% 60% 40% 20% 0% -10 TA(degree C) www.Power-Systems.de -5 Nom 5 10 INPUT VOLTAGE(%) Page: 4 / 5 Version: 4-Oct-02 DC-DC Converter UNIT 1R Serie ( 1W SINGLE OUTPUTS WITH REGULATION ) 1R SERIES APPLICATION NOTES: EXTERNAL CAPACITANCE REQUIREMENTS: No external capacitance is required for operation of the 1R series. To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm from DC to 100KHz is required. External output capacitance is not required for operation, however it is recommended that 10uF tantalum and 0.1uF ceramic capacitance be selected for reduced system noise. Additional output capacitance may be added for increased filtering, but should not exceed 220uF. Negative Outputs: A negative output voltage may be obtained by connecting the +OUT to circuit ground and connecting –OUT as the negative output. FOR MORE INFORMATION CALL: Power Systems – The Power Solution 74360 Ilsfeld-Auenstein ( Germany ) Dörnet 8 Tel: + 49 / 70 62 / 67 59 – 6 E-mail: [email protected] Home Page: www.Power-Systems.de www.Power-Systems.de Page: 5 / 5 Fax: + 49 / 70 62 / 67 59 -80 Version: 4-Oct-02