PSC2505 & PSC2507 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Configuration & Dimensions Series PSC2505 PSC2507 Dimensions [mm] A 6.40±0.3 6.40±0.3 B 5.50±0.3 5.50±0.3 C 1.65±0.15 2.00±0.15 D(typ.) 0.80 0.80 E(typ.) 2.00 2.00 F(typ.) 4.50 4.50 G(ref.) 6.80 6.80 H(ref.) 4.00 4.00 I(ref.) 1.40 1.40 J(ref.) 2.60 2.60 2. Schematic Diagram 3. Materials a.- Core : Ferrite DR core b.- Base : Ceramic base c.- Wire : Enamelled copper wire (class F) d.- Terminal : W / Ni / Au e.- Adhesive : Epoxy resin f.- Remark : Lead content 200ppm max. include ferrite 4. General Specification a.- Temp. rise : 40ºC max. b.- Storage temp. : -40ºC ~ +125ºC c.- Operating temp. : -40ºC ~ +105ºC d.- Resistance to solder heat : 260ºC. 10 secs 1 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC2505 & PSC2507 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 5. Electrical Characteristics PSC2505 (1.2µH – 330µH) Test Freq. 17 L (KHz) 100 Q (MHz) 7.96 120.0 0.09 Irms (A) ∆T=40ºC max. 2.30 18 100 7.96 110.0 0.10 2.00 3.00 2.5±20% 14 100 7.96 85.0 0.12 1.70 2.40 PSC2505 – 3R3M 3.3±20% 16 100 7.96 75.0 0.15 1.50 2.20 PSC2505 – 3R9M 3.9±20% 15 100 7.96 70.0 0.20 1.40 2.10 PSC2505 – 4R7M 4.7±20% 15 100 7.96 65.0 0.22 1.30 1.90 PSC2505 – 5R6M 5.6±20% 14 100 7.96 60.0 0.25 1.25 1.80 PSC2505 – 6R8M 6.8±20% 11 100 7.96 55.0 0.27 1.20 1.65 PSC2505 – 8R2M 8.2±20% 14 100 7.96 50.0 0.32 1.08 1.45 PSC2505 – 100M 10.0±20% 13 100 2.52 45.0 0.35 1.00 1.25 PSC2505 – 120M 12.0±20% 12 100 2.52 40.0 0.40 0.90 1.15 PSC2505 – 150M 15.0±20% 13 100 2.52 32.0 0.56 0.80 1.00 PSC2505 – 220M 22.0±20% 14 100 2.52 26.0 0.70 0.70 0.90 PSC2505 – 270M 27.0±20% 18 100 2.52 25.0 1.00 0.55 0.80 PSC2505 – 330K 33.0±10% 17 100 2.52 23.0 1.10 0.50 0.72 PSC2505 – 470K 47.0±10% 14 100 2.52 20.0 1.45 0.46 0.67 PSC2505 – 560K 56.0±10% 16 100 2.52 18.0 2.00 0.36 0.52 PSC2505 – 680K 68.0±10% 24 100 2.52 15.0 2.40 0.32 0.48 PSC2505 – 820K 82.0±10% 23 100 2.52 14.0 2.70 0.30 0.44 PSC2505 – 101K 100.0±10% 50 100 0.796 13.0 3.00 0.28 0.42 PSC2505 – 121K 120.0±10% 45 100 0.796 12.0 3.50 0.26 0.40 PSC2505 – 151K 150.0±10% 55 100 0.796 10.0 4.80 0.24 0.34 PSC2505 – 181K 180.0±10% 55 100 0.796 9.0 5.50 0.22 0.32 PSC2505 – 221K 220.0±10% 50 100 0.796 8.0 8.00 0.18 0.26 PSC2505 – 271K 270.0±10% 60 100 0.796 7.0 9.00 0.15 0.23 PSC2505 – 331K 330.0±10% 60 100 0.796 6.0 10.0 0.13 0.22 DWG No. Inductance (µH) Q ref. PSC2505 – 1R2M 1.2±20% PSC2505 – 1R5M 1.5±20% PSC2505 – 2R5M SRF (MHz) typ. RDC (Ω) max. Isat (A) ∆L/L0A=10% typ. 3.40 2 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC2505 & PSC2507 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSC2507 (1.2µH – 470µH) Test Freq. 15 L (KHz) 100 Q (MHz) 7.96 130.0 0.036 Irms (A) ∆T=40ºC max. 2.60 13 100 7.96 120.0 0.042 2.40 2.80 1.8±20% 12 100 7.96 105.0 0.046 2.20 2.60 PSC2507 – 2R5M 2.5±20% 16 100 7.96 85.0 0.065 2.00 2.40 PSC2507 – 3R5M 3.5±20% 18 100 7.96 70.0 0.100 1.70 2.20 PSC2507 – 4R7M 4.7±20% 15 100 7.96 60.0 0.135 1.50 1.90 PSC2507 – 5R6M 5.6±20% 13 100 7.96 55.0 0.140 1.40 1.70 PSC2507 – 6R8M 6.8±20% 13 100 7.96 53.0 0.180 1.30 1.50 PSC2507 – 8R2M 8.2±20% 12 100 7.96 50.0 0.200 1.20 1.40 PSC2507 – 100M 10.0±20% 14 100 2.52 42.0 0.260 1.10 1.30 PSC2507 – 120M 12.0±20% 14 100 2.52 38.0 0.280 1.00 1.20 PSC2507 – 150M 15.0±20% 13 100 2.52 35.0 0.350 0.90 1.10 PSC2507 – 180M 18.0±20% 12 100 2.52 25.0 0.400 0.85 0.90 PSC2507 – 220M 22.0±20% 14 100 2.52 26.0 0.520 0.80 0.85 PSC2507 – 270M 27.0±20% 11 100 2.52 25.0 0.600 0.75 0.80 PSC2507 – 330K 33.0±10% 12 100 2.52 23.0 0.720 0.62 0.75 PSC2507 – 390K 39.0±10% 12 100 2.52 20.0 0.780 0.56 0.65 PSC2507 – 470K 47.0±10% 12 100 2.52 18.0 1.130 0.50 0.60 PSC2507 – 560K 56.0±10% 15 100 2.52 16.0 1.400 0.46 0.52 PSC2507 – 680K 68.0±10% 20 100 2.52 14.0 1.700 0.40 0.48 PSC2507 – 820K 82.0±10% 18 100 2.52 13.0 1.850 0.36 0.42 PSC2507 – 101K 100.0±10% 35 100 0.796 11.0 2.800 0.32 0.38 PSC2507 – 121K 120.0±10% 35 100 0.796 9.0 2.900 0.28 0.34 PSC2507 – 151K 150.0±10% 45 100 0.796 8.5 4.500 0.24 0.32 PSC2507 – 181K 180.0±10% 50 100 0.796 7.5 5.200 0.22 0.30 PSC2507 – 221K 220.0±10% 55 100 0.796 6.6 7.500 0.20 0.28 PSC2507 – 271K 270.0±10% 55 100 0.796 6.0 9.200 0.18 0.24 PSC2507 – 331K 330.0±10% 55 100 0.796 5.0 10.500 0.16 0.20 PSC2507 – 391K 390.0±10% 60 100 0.796 4.0 11.500 0.14 0.18 PSC2507 – 471K 470.0±10% 60 100 0.796 3.0 12.600 0.13 0.16 DWG No. Inductance (µH) Q ref. PSC2507 – 1R2M 1.2±20% PSC2507 – 1R5M 1.5±20% PSC2507 – 1R8M SRF (MHz) typ. RDC (Ω) max. Isat (A) ∆L/L0A=10% typ. 3.20 3 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC2505 & PSC2507 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 6. Curve Inductance VS. DC Current Curve PSC2505 PSC2507 7. Packaging Information P: 8mm Leader no component 200 mm min. 4mm Components Trailer no component 400 mm min. User direction of feed 4 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC2505 & PSC2507 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com Dimensions [mm] Style A 178 07 – 12 B 21±0.8 C 13±0.5 D 12 G 14+0 Inner : Reel Series PSC2505 PSC2507 Q’TY(pcs) 800 800 G.W.(gw) 250 250 N 50-0 T 18.4 Outer : Carton Style 07 – 12 07 – 12 Q’TY(pcs) 32,000 32,000 G.W.(Kg) 11.5 11.5 Size(cm) 42 x 41 x 24 42 x 41 x 24 8. Labelling 9. Reliability Test Test item Solderability Specification More than 90% of the terminal electrode shall be covered with fresh solder Thermal shock test (Temp. cycle) Inductance shall not change more than ±20% Test condition Preheat : 150±25% for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5ºC Flux : Rosin Dip time : 4±1 seconds Room temp. 15 minutes -25±2ºC 30 minutes Room temp. 15 minutes 85±2ºC 30 minutes Total : 50 cycles Humidity Resistance test High temp. Resistance test Temperature : 40±2ºC Humidity : 90 ~ 95% Applied current : Per specifications Time : 500 hours Temperature : 105±2ºC Applied current : Per specifications Time : 500 hours 5 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSC2505 & PSC2507 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 10. Edition Control Edition 1st Date 31/08/06 Change description Update Specification Made by Pablo Pozo 6 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.