PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Configuration & Dimensions PS1204, PS1205B, PS1206B Series PS1204 PS1205A PS1205B PS1206 PS1206B PS1205A, PS1206 Dimensions [mm] A 12.50±0.3 12.50±0.3 12.50±0.3 12.50±0.3 12.50±0.3 H(ref.) 10.50 B 12.50±0.3 12.50±0.3 12.50±0.3 12.50±0.3 12.50±0.3 C 4.00±0.3 5.00±0.3 5.00±0.3 5.70±0.3 5.70±0.3 D 1.90±0.2 1.90±0.2 1.90±0.2 1.90±0.2 1.90±0.2 E(nom.) 2.50 2.50 2.50 2.50 2.50 I(ref.) 4.15 J(ref.) 3.00 K(ref.) 13.00 M(ref.) 4.70 E1(ref.) 3.00 3.00 3.00 2.00 2.00 N(ref.) 4.50 E2(ref.) 2.00 2.00 2.00 2.00 2.00 P(ref.) 7.50 F 7.50±0.25 7.50±0.25 7.50±0.25 7.50±0.25 7.50±0.25 F1(ref.) 6.40 6.40 6.40 6.40 6.40 P1(ref.) 3.75 F2(ref.) 5.20 5.20 5.20 5.20 5.20 P2(ref.) 3.75 2. Schematic Diagram 1 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 3. Materials a.- Core : Ferrite ER core b.- Core : Ferrite SB core c.- Wire : Ultra – fine rectangular enamelled copper wire (class F) d.- Terminal : Cu / Sn e.- Adhesive : Epoxy resin f.- Adhesive : Epoxy resin g.- Remark : Lead content 200ppm max. include ferrite 4. General Specification a.- Temp. rise : 40ºC max. b.- Storage temp. : -40ºC ~ +125ºC c.- Operating temp. : -40ºC ~ +105ºC d.- Resistance to solder heat : 260ºC. 10 secs 5. Electrical Characteristics PS1204 (0.75μH – 2μH) DWG No. PS1204 – R50M PS1204 – 1R1M PS1204 – 1R8M Initial Inductance L0 (μH) 0.75±20% 1.30±20% 2.00±20% Inductance at flatpoint L1 (μH) 0.55±20% 1.10±20% 1.80±20% Flat Point ref. (A) RDC (mΩ) max. Irms (A) Isat (A) 2.0 2.0 2.0 3.0 4.5 6.0 13.0 12.0 10.0 14.0 13.0 11.0 2 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PS1205A (0.9μH – 10.5μH) Inductance at flatpoint L1 (μH) 0.75±25% 1.25±25% 1.80±25% 3.20±25% 4.60±25% Flat Point ref. (A) RDC (mΩ) max. Irms (A) Isat (A) PS1205A – R90 PS1205A – 1R4 PS1205A – 2R0 PS1205A – 3R2 PS1205A – 4R6 Initial Inductance L0 (μH) 0.90±25% 1.40±25% 2.00±25% 3.50±25% 4.80±25% 5.0 5.0 4.0 2.0 2.0 2.5 3.4 4.6 9.0 10.5 18.0 15.0 12.0 8.6 8.2 20.0 16.0 13.0 9.0 7.2 PS1205A – 6R4 PS1205A – 8R2 6.80±25% 8.60±25% 6.40±25% 8.20±25% 3.0 3.0 11.0 12.0 7.8 7.2 6.0 5.4 PS1205A – 100 10.50±25% 10.00±25% 2.0 13.5 6.5 4.7 Inductance at flatpoint L1 (μH) 0.75±25% 1.25±25% 1.80±25% 3.20±25% 4.60±25% 6.40±25% 8.20±25% 10.00±25% Flat Point ref. (A) RDC (mΩ) max. Irms (A) Isat (A) 5.0 5.0 4.0 2.0 2.0 3.0 3.0 2.0 2.5 3.4 4.6 9.0 10.5 11.0 12.0 13.5 18.0 15.0 12.0 8.6 8.2 7.8 7.2 6.5 20.0 16.0 13.0 9.0 7.2 6.0 5.4 4.7 Inductance at flatpoint L1 (μH) 2.50±25% 2.30±25% 3.20±25% 4.60±25% Flat Point ref. (A) RDC (mΩ) max. Irms (A) Isat (A) 5.0 4.0 3.0 2.0 6.0 4.6 6.0 7.0 13.0 10.5 10.0 9.0 12.0 11.0 8.5 7.5 DWG No. PS1205B (0.9μH – 10.5μH) DWG No. PS1205B – R90 PS1205B – 1R4 PS1205B – 2R0 PS1205B – 3R2 PS1205B – 4R6 PS1205B – 6R4 PS1205B – 8R2 PS1205B – 100 Initial Inductance L0 (μH) 0.90±25% 1.40±25% 2.00±25% 3.50±25% 4.80±25% 6.80±25% 8.60±25% 10.50±25% PS1206 (2.7μH – 4.8μH) DWG No. PS1206 – 2R5 PS1206 – 2R3 PS1206 – 3R2 PS1206 – 4R6 Initial Inductance L0 (μH) 2.70±25% 2.50±25% 3.60±25% 4.80±25% 3 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PS1206B (0.7μH – 3μH) Inductance at flatpoint L1 (μH) 0.47±25% 0.60±25% 0.80±25% 1.30±25% 2.00±25% Flat Point ref. (A) RDC (mΩ) max. Irms (A) Isat (A) PS1206B – R47 PS1206B – R60 PS1206B – R80 PS1206B – 1R3 PS1206B – 2R0 Initial Inductance L0 (μH) 0.70±25% 0.90±25% 1.10±25% 1.50±25% 2.20±25% 5.0 5.0 5.0 4.0 4.0 2.30 2.30 3.20 3.60 6.00 16.50 15.50 14.50 12.50 11.50 30.00 26.00 25.00 19.00 15.00 PS1206B – 2R8 3.00±25% 2.80±25% 3.0 7.00 10.50 13.00 DWG No. [Inductance tested at 100KHz / 1V] [Irms base on temp. rise 40ºC max.] [Isat base on inductance drop 20% max. of L1 value] 6. Curve Inductance VS. DC Superposition Characteristics PS1204 4 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PS1205A & PS1205B PS1206 & PS1206B 5 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 7. Packaging Information P : 16mm 4 mm End Start Leader no component 200 mm min. Trailer no component 400 mm min. Components User direction of feed Style 13 – 24 Series PS1204 PS1205A PS1205B PS1206 PS1206B Dimensions [mm] A 330 B 21±0.8 C 13 D 24 G 26+0 Inner : Reel Q’TY(pcs) 800 600 600 600 600 G.W.(gw) 2,150 2,150 2,150 2,150 2,150 N 50-0 T 30.4 Outer : Carton Style 13 – 24 13 – 24 13 - 24 13 – 24 13 - 24 Q’TY(pcs) 3,200 2,400 2,400 2,400 2,400 G.W.(Kg) 11.30 11.30 11.30 11.30 11.30 Size(cm) 40 x 40 x 24 40 x 40 x 24 40 x 40 x 24 40 x 40 x 24 40 x 40 x 24 6 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 8. Labelling 9. Reliability Test Test item Specification More than 90% of the terminal electrode shall be covered with fresh solder Solderability Thermal shock test (Temp. cycle) Inductance shall not change more than ±20% Test condition Preheat : 150±25% for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5ºC Flux : Rosin Dip time : 4±1 seconds Room temp. 15 minutes -25±2ºC 30 minutes Room temp. 15 minutes 85±2ºC 30 minutes Total : 50 cycles Humidity Resistance test High temp. Resistance test Temperature : 40±2ºC Humidity : 90 ~ 95% Applied current : Per specifications Time : 500 hours Temperature : 105±2ºC Applied current : Per specifications Time : 500 hours 10. Edition Control Edition 1st Date 31/08/06 Change description Update Specification Made by Pablo Pozo 7 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PS1204 , PS1205A , PS1205B , PS1206 & PS1206B SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 8 SMD Power Inductors P PR REEM MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.