P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL00284 Series SMD LED Bi-Color 1311 Package Features Absolute Maximum Ratings at TA = 25°C *Flat Lens Package 3.3 x 2.9 x 1.1mm Power Dissipation (Red)…………………………………………………………... 72mW *AlGaAs Super Bright Red and GaP Green LED Chips used *Low Current Requirements *High Light Output *Compatible with IR Solder-Process *Industry Standard Footprint *For use as Optical Indicator, Backlighting *2000 or 1000 pcs per Reel *RoHS Compliant Power Dissipation (Green)……………………………………………………….... 65mW Reverse Voltage (<100 mA)………………………...……………………………….… 5.0V Max Forward Current (Red)……………………………………………………….. 30mA Max Forward Current (Green)………………………………………………….….. 25mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…........................................ 100mA Operating Temperature Range….……………………………………..… -40°C to +85°C Storage Temperature Range….……….……….………………………… -40°C to +85°C Reflow Soldering Temperature…………………….….………..…. 260°C for 10 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Min Typ 660 568 645 570 120° 1.85 2.2 2.4 2.6 18.0 5.0 40.0 12.0 Water Clear Lens PL00284-WCRG2113 Deep Red Green AlGaAs GaP Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. 0.6 3.3 0.7 2.1 0.6 4 3 1.9 2.9 1 2 2 1 4 3 Recommended Soldering Pad Layout 1.5 0.9 0.5 1.0 1.1 0.9 1.5 2.0 1.5 04-05-07 Rev 0 RS