P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL00283 Series SMD LED Bi-Color 1110 Package Features Absolute Maximum Ratings at TA = 25°C *Flat Lens Package 3.0 x 2.5 x 1.1mm Power Dissipation (Red)…………………………………………………………... 78mW *AlGaInP Ultra Bright Orange-Red and Yellow-Green LED Chips used *Low Current Requirements *High Light Output *Compatible with IR Solder-Process *Industry Standard Footprint *For use as Optical Indicator, Backlighting *2000 or 1000 pcs per Reel *RoHS Compliant Power Dissipation (Green)……………………………………………………….... 78mW Reverse Voltage (<100 mA)………………………...……………………………….… 5.0V Max Forward Current (Red)……………………………………………………….. 30mA Max Forward Current (Green)………………………………………………….….. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…........................................ 100mA Operating Temperature Range….……………………………………..… -40°C to +85°C Storage Temperature Range….……….……….………………………… -40°C to +85°C Reflow Soldering Temperature…………………….….………..…. 260°C for 10 seconds Electrical & Optical Characteristics at TA = 25°C Part Number Emitting Color Chip Material Water Clear Lens PL00283-WCRG0817 Orange-Red Yellow-Green AlGaInP AlGaInP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 630 572 620 574 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 120° 2.0 2.1 2.6 2.6 30.0 30.0 60.0 60.0 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. 3.00 2 2.50 4 1 0.80 1.50 4 3 2 3 0.60 1 2.00 1.50 Recommended Soldering Pad Layout 0.60 0.50 2 4 1 3 10-26-06 Rev 0 RS