P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL00300 Series Tri-Color SMD LED 1204 Package Absolute Maximum Ratings at TA = 25°C Features *Flat Lens Package 3.2 x 1.35 x 1.0mm *AlGaInP Ultra Bright Red and Green and GaN Blue LED Chips used *Low Current Requirements *High Light Output *Compatible with IR Solder-Process *Industry Standard Footprint *For use as Optical Indicator, Backlighting *2000 or 1000 pcs per Reel *RoHS Compliant Power Dissipation (Red)………………………………………………………..…. 72mW Power Dissipation (Green)…...……………………………………………...…….. 78mW Power Dissipation (Blue)…...…………………………………...……………….. 120mW Reverse Voltage (<100 mA)………………………...…………………………...….… 5.0V Max Forward Current………………........................................................................ 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) (Red).................................. 150mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) (Green & Blue).................. 100mA Operating Temperature Range….……………………………………..… -40°C to +85°C Storage Temperature Range….……….……….………………………… -40°C to +85°C Reflow Soldering Temperature…………………….….………..…. 260°C for 10 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Peak Wave Length nm Chip Material Water Clear Lens PL00300-WCRGB260508 Red AlGaInP Yellow-Green AlGaInP Blue GaN Dominant Viewing Wave Angle Length nm Deg 650 574 — 630 570 470 120° Forward Voltage @20mA (V) Typ Max Luminous Intensity @20mA(mcd) Min Typ 1.95 2.1 3.5 40.0 30.0 25.0 2.4 2.6 4.0 80.0 70.0 40.0 Package Dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. 0.40 0.5 3.2 0.55 3 4 POLARITY MARK 0.55 2 1 0.59 1.0 2 3 0.20 0.46 2.0 1.5 4 1.35 1 Red 2 Green 3 Blue Recommended Soldering Pad Layout 0.5 04-05-07 Rev 0 RS