P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL07 Series 3mm (T1) Bi-Color LED Absolute Maximum Ratings at TA = 25°C Features *Popular T1 3mm Lens Style with small Flange *1 Hi-Eff Red and 1 GaP Green Chip used *High Intensity *Low Current Requirement *Reliable and Rugged *RoHS Compliant Power Dissipation…………………………………………………………………………....… 78mW Reverse Voltage (<100µA)………..…………...………………………………………………..… 5.0V Max Forward Current…………..………………..…………………………………….……….. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………………….…………. 100mA Operating Temperature Range…………………………………………………….… -25°C to +85°C Storage Temperature Range..………….…………………………………………… -40°C to +100°C Soldering Temperature (1.6mm below body)……………………………………….. 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Part Number Emitting Color Chip Material White Diffused Lens PL07-WDRG1213 Orange-Red Green GaAsP GaP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Min Typ 635 567 626 572 95° 2.1 2.1 2.6 2.6 8.0 7.0 14.0 12.0 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 24.0Min. 4.3 Anode Green, Yellow, Red Orange, Red 2.9 2.54 ±0.1 0.5 Square GreenYellow, Orange Anode Red, Green, 1.0±0.5 1.02 1.5typ. 3.1 03-08-07 Rev 1 RS