P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL85 Series 5mm Bi-Color (T1¾) LED Absolute Maximum Ratings at TA = 25°C Features *Popular 5mm Lens Style with Flange *2 Leaded Bi-Color *1 Yellow and 1 Green Chip used *Uniform Light Output *Wide Viewing Angle *RoHS Compliant Power Dissipation Green..……………………………………………………………... 78mW Reverse Voltage (<100µA)………..………….………………..………………………….. 5.0V Max Forward Current…………..………………..………………….……….……....… 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………….…………. 100mA Operating Temperature Range…………………………………………...…. -25°C to +85°C Storage Temperature Range..………….………………………………...…. -40°C to +100°C Soldering Temperature (1.6mm below body)……………………………….. 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material White Diffused Lens PL85-WDGY1301 Green Yellow GaP GaAsP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 567 585 572 590 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 70° 2.1 2.1 2.6 2.6 5.0 4.0 11.0 10.0 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 8.7 5.9 24.0Min. Anode Green, Yellow Green 5.0 Anode Red, Yellow 2.54±0.1 0.5 Square Yellow 1.5typ. 1.0 02-15-07 Rev 1 RS