P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL16 Series 5mm (T1¾) Full Color (RGB) LED Absolute Maximum Ratings at TA = 25°C Features *Popular 5mm Lens Style with Flange *Four Leads with Common Cathode *Water Clear Lens for High Light Output *1.27mm (0.05”) lead spacing *Hyper Red, Pure Green and Blue Chips used (RGB) *RoHS Compliant Power Dissipation (Red)………………………………………………………………………. 72mW Power Dissipation (Green & Blue)………………………………………………………….… 80mW Reverse Voltage (<100µA) …….……………...…………………………………………………. 5.0V Max Forward Current …………..………………..……………………………………………. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) ....……………………………………..100mA Operating Temperature Range …………………………………………………...… - 25°C to +85°C Storage Temperature Range ………….…………………………………………… - 40°C to +100°C Soldering Temperature (1.6mm below body) …………………………………...….. 260°C for 5 seconds Electrostatic Discharge (Green & Blue)………………………………………………………... 300V Electrical & Optical Characteristics at TA = 25°C Part Number Emitting Color Chip Material Water Clear Lens PL16N-WDRGB190602 Red Pure Green Blue AlGaInP InGaN InGaN Peak Wave Length Dominant Viewing Angle Wave Length 2θ ½ Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) nm nm Deg Typ Max Min Typ 639 — 468 630 520 470 40° 1.9 3.2 3.2 2.4 4.0 4.0 250 550 300 450 950 500 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 1) Red Anode 2) Common Cathode 3) Blue Anode 4) Green Anode 10-18-06 Rev 1 RS