P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL84 Series Bi-Color 3 Leaded 5mm (T1¾) LED Features Absolute Maximum Ratings at TA = 25°C *Popular 5mm Lens Style with Flange *Hi-Eff Red & Green Chips used *Common Cathode *White Diffused Lens for a Wide Viewing Angle *2.54 mm Lead Spacing *Both LED Chips lit will create a 3rd Color *RoHS Compliant Power Dissipation (Red)….……………………………………..……………………….…….. 78mW Power Dissipation (Green)….……………………………………..………………………..…. 78mW Reverse Voltage (<100µA)………..…………...……………………………………………..…… 5.0V Max Forward Current…………..………………..…………………………………….….....… 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………………….……….… 100mA Operating Temperature Range……………………………………………………..… -25°C to +85°C Storage Temperature Range..………….………………………………………….... –40°C to +100°C Soldering Temperature (1.6mm below body)……………………………………….. 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material Dominant Wave Length nm nm Deg Typ Max Min Typ 635 567 626 572 70° 2.1 2.1 2.6 2.6 13.5 13.5 35.0 34.0 White Diffused Lens PL84-WDRG1213 Hi Eff Red Green Viewing Forward Angle Voltage @20mA (V) 2θ ½ Peak Wave Length GaAsP GaP Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 25.0Min. 23.0Min. 22.0Min. 8.7 5.0 Anode Red, Yellow, Amber Red 2.54typ. Cathode 2.54typ. AnodeGreen Green, Yellow 2.3±0.5 5.9 0.5 Square 5.0 1.0 6-08-06 Rev 0 RS