P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL43 Series Rectangular LED Absolute Maximum Ratings at TA = 25°C Features *Rectangular 2x5mm Lens without Flange *Top Diffused for Uniform Light Output *AlGaAs Super Bright Red LED Chip used *Low Current Requirements *High Light Output *Reliable & Rugged *IC compatible *RoHS Compliant Power Dissipation…………………………………………………………………………...…. 66mW Reverse Voltage (<100µA) …….……………...………………………………………………….. 5.0V Max Forward Current …………..………………..……………………………………………. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) ....…………………………………….. 100mA Operating Temperature Range ………………………………………………………- 25°C to +85°C Storage Temperature Range ………….…………………………………………….- 40°C to +100°C Soldering Temperature (1.6mm below body) ……………………………………..…260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material Color Diffused Lens PL43-CDR21 Deep Red AlGaAs Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 660 643 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 90° 1.8 2.2 20.0 40.0 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads. 7.0 24.0Min. 5.0 2.0 2.54±0.1 0.5 Square Anode 0.5±0.5 1.5typ. 03-08-07 REV 0 RS