AND113S Standard LED Standard Bright LED LAMPS Weight: 0:30 g Unit: mm AND113S ø5.8 ± 0.2 Standard LED T-1 3/4 Package (5 mm) Features 12.75 ±0.5 Cathode Index Optical Characteristics (Ta = 25°C) 21.1 0.5 1.5 Color 2.54 0.5 Cathode Index 1 2 • RoHS Compliant • Low power requirement • Flush-mount • All plastic molded lens • Color: GaAsP–Red (1) 7.6 2.5 max including resin ø5.0 ± 0.2 Axial Luminous Intensity (mcd) Lens Desc. LED Lens Red Red Min. Typ. Test Condition (IF–mA) 50 150 10 Clear Viewing Angle 2θ1/2 (deg) 30 Absolute Maximum Ratings (Ta = 25°C) 1. Anode 2. Cathode Symbol Rating (Yellow) Unit Forward Current (DC) IF 30 mA Reverse Voltage VR 5 V Characteristics PD 105 mW Operating Temperature TOpr -40 to +85 °C Storage Temperature Range TStg -40 to +85 °C Power Dissipation Electro-Optical Characteristics (Ta = 25°C) Yellow Characteristics Symbol Test Condition Unit Min. Typ. Max. Forward Voltage VF IF = 20mA – 2.0 2.5 V Reverse Current IR VR = 5 V – – 10 µA Peak Emission Wavelength λp IF = 15mA – 625 – nm Spectral Line Half Width λ IF = 15mA – 45 – nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 6/14/07 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 1 AND113S Standard LED Standard Bright LED LAMPS IF vs. VF 50 Radiation Pattern TA = 25°C Forward Current IF (mA) 30 20 20° 0° 10° 10° 20° 30° 30° 10 40° 40° 50° 50° 5 60° 60° 3 70° 70° 2 80° 80° 1 1.7 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 90° 1.0 0.8 IV vs. IF 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 90° 1.0 Relative Luminous Intensity – Wavelength 5 2 Relative Luminous Intensity Relative Luminous Intensity IV 1.0 1 0.5 0.2 0.1 1 2 5 10 20 Forward Current IF (mA) 0.8 0.6 0.4 0.2 0 50 600 580 IV vs. TC Allowable Forward Current IF (mA) Relative Luminous Intensity IV 2 640 660 680 IV vs.TA 3 2 1 0.5 0.4 0.3 -20 620 Wavelength λ (nm) This graph shows relative luminous vs. forward current. At three points (IF = 10, 15, 20mA) each relation is normalized.) 0 20 40 60 Case Temperature TC (°C) 80 40 30 20 10 0 0 20 40 60 100 Ambient Temperature TA (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 80 6/14/07