AND116SG Standard Bright LED Lamps Weight: 0.35 g Unit: mm 5.9 Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. AND116SG 5.0 1.0 8.7 Dual Color T-1 3/4 (5mm) 0.5 • Dual color: Red (GaAsP) / Green (GaP) • Common cathode • All plastic mold type, milky diffused lens • Low drive current: 15 to 20 mA • Fast response time, capable of pulse operation • RoHS Compliant 23.9 MIN. 25.4 MIN. 22.1 MIN. Features Optical Characteristics (Ta = 25°C) 2.54 2.54 Cathode Index Color Lens Desc. 0.5 1 2 3 1. Anode (Green) 2. Common Cathode 3. Anode (Red) LED Lens Red Milky Green Milky Axial Luminous Intensity (mcd) Test Condition (IF–mA) Viewing Angle 2θ1/2 (deg) Min. Typ. Diffused 10 12 20 70 Diffused 10 12 20 70 Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Forward Current IF Rating Red Green 25 25 Unit mA Reverse Voltage VR 5 5 V Power Dissipation PD 75 75 Total Package Operating Temperature TOpr -25 to +85 °C Storage Temperature Range TStg -25 to +100 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Red Typ. Green Max. Typ. Max. Unit Forward Voltage VF IF = 20mA 2.1 3.0 2.1 3.0 V Reverse Current IR VR = 4 V – 100 – 100 µA Peak Emission Wavelength λp IF = 20mA 635 – 565 – nm Spectral Line Half Width λ IF = 20mA 40 – 25 – nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND116SG Dual Color Standard Bright LED Lamps IV – IF IV – IF 50 50 Ta = 25°C Ta = 25°C 30 Luminous Intensity IV (mcd) Luminous Intensity IV (mcd) 30 Red 10 5 3 10 5 3 Green 1 1 1 3 5 10 30 50 1 100 3 IF – VF 10 30 50 100 IF – Ta 50 40 Forward Current IF (mcd) Ta = 25°C 30 Forward Current IF (mcd) 5 Forward Current IF (mA) Forward Current IF (mA) Green Red 10 5 3 30 20 10 1 1 1.7 1.8 1.9 2.0 2.1 2.2 0 2.3 20 40 60 80 100 Ambient Temperature Ta (°C) Forward Voltage VF (V) IV – TC Relative Luminous Intensity – Wavelength 3 1.0 IF = 15mA Ta = 25°C Relative Lumnoius Intensigy Relative Luminous Intensity IV Red 1 Green 0.5 0.3 1 -20 0 2.0 40 Case Temperature TC (°C) 60 80 0.8 0.6 Red 0.4 Green 0.2 0 540 560 580 600 620 640 660 680 Wavelength λ (nm) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07