AND157HRP Ultra Bright LED Lamps: Type 3 Weight: 0.31 g Unit: mm AND157HRP 5.9 InGaAlP High Brightness Red Light Emission T-1 3/4 Package (5 mm) 5.0 Features 0.5 24.0 MIN. 1.5 TYP 1.0 8.7 • Peak wavelength (λp = 644 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current: 1 to 20 mA DC • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power luminous intensity • Suitable for Outdoor Message Signboards • High reliability, storage temperature -40 to +20°C • RoHS Compliant Maximum Ratings (Ta = 25°C) 2.54 0.5 Cathode Index 1 2 1. Athode 2. Cathode Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 4 V Power Dissipation PD 100 mW Operating Temperature Range TOpr -25 to 85 °C Storage Temperature Range TStg -25 to 120 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 2.0 2.4 V Reverse Current IR VR = 4 V – – 50 µA Luminous Intensity IV IF = 20 mA 700 1,800 – mcd Peak Emission Wavelength lP IF = 20 mA – 644 – nm Spectral Line Half Width ∆λ IF = 20 mA – 15 – nm Dominant Wavelength λd IF = 20 mA – 630 – nm Full Viewing Angle θ IV = 1/2 Peak – 20 – degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6/14/07 AND157HRP InGaAlP High Brightness Red Light Emission Ultra Bright LED Lamps: Type 3 IF – VF IV – VF 5000 Ta = 25°C 3000 Ta = 25°C 30 Luminous Intensity IV (mcd) Forward Current IF (mA) 50 10 5 3 1000 500 300 100 50 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 20 2.3 1 3 Forward Voltage VF (V) 10 30 50 100 300 500 Forward Current IF (mA) Relative Luminous Intensity – Wavelength IV – TC 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 5 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 580 80 600 620 640 660 680 700 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 100 6/14/07