AND190HAP Ultra Bright LED Lamps: Type 3 Weight: 1.0 g Unit: mm AND190HAP 11.0±0.3 InGaAlP High Brightness Amber Light Emission T-3 Package (10 mm) 10.0±0.2 • New emission material (InGaAlP) amber LED • Peak wavelength (λp = 612 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current, (forward current = 1 to 20 mA) • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power luminous intensity • RoHS Compliant • Suitable for Outdoor Message Signboards 1.0 MIN 0.5 26.4 MIN. 13.5±0.3 2.0±0.2 Features Maximum Ratings (Ta = 25°C) 2.54 1 2 0.5 Cathode Index 1. Anode 2. Cathode Characteristics Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 5 V Power Dissipation PD 125 mW Operating Temperature Range TOpr -40 to 100 °C Storage Temperature Range TStg -40 to 100 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Forward Voltage VF IF = 20 mA Unit – 2.1 2.8 V Reverse Current IR VR = 4 V – – 50 µA Luminous Intensity IV IF = 20 mA 4,500 8,000 – mcd Peak Emission Wavelength lP IF = 20 mA – 612 – nm Spectral Line Half Width ∆λ IF = 20 mA – 15 – nm Dominant Wavelength λd IF = 20 mA – 605 – nm Full Viewing Angle θ IV = 1/2 Peak – 6 – degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6/12/07 AND190HAP InGaAlP High Brightness Amber Light Emission Ultra Bright LED Lamps: Type 3 IV – IF IF – VF 50000 50 Ta = 25°C Luminous Intensity IV (mcd) Forward Current IF (mA) 30000 Ta = 25°C 30 10 5 3 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 10000 5000 3000 1000 500 0.5 2.3 1 Forward Voltage VF (V) IV – TC 5 10 30 50 100 Relative Luminous Intensity – Wavelength 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 3 Forward Current IF (mA) 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 540 80 Case Temperature TC (°C) Radiation Pattern 560 580 600 620 Wavelength λ (nm) 640 660 IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 80 60 40 20 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 100 6/12/07