AND262HW Ultra Bright LED Lamps Package Dimensions Unit: mm AND262HW InGaN High Brightness White Light Emission • 3 mm (T-1) Package • All plastic mold type, clear colorless lens • Low drive current: 1 to 20 mA DC • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power intensity • High reliability • RoHS Compliant Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Forward Current IF 25 mA Peak Forward Current (Duty 1/10@1KHz) IFP 100 ,A Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operating Temperature Range TOpr -40 to 85 ºC Storage Temperature Range TSig -40 to 100 ºC Soldering Temperature (T=5 sec) TSOL 260 ± 5 ºC Electrostatic Discharge ESD 4K V Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 3.5 4.0 V Reverse Current IR VR = 5V – – 50 µA Luminous Intensity IV IF = 20 mA 1800 2250 – mcd Wavelength = 550 nm Chromaticity Coordinates Full Viewing Angle x IF = 10 mA – 0.29 – y IF = 10 mA – 0.28 – θ IV = 1/2 Peak – 35 – degree Precaution Please be careful of the following: Absolute secure counter measures against static electricity and surge should be taken when handling theses procedures. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 3/30/09 AND262HW InGaN High Brightness White Light Emission Ultra Bright LED Lamps Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 3/30/09