AND4WA Ultra Bright LED Lamps Weight: 2.0 mg Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Note: Tolerance unless mentioned is: ± 0.1 mm; Unit = mm AND4WA InGaN Ultra Bright White Light Emission Surface Mount Package Features • • • • • RoHS Compliant P-LCC-2 package Fluorescense Type High Luminous Intensity High Efficiency • Pb-free Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Peak Forward Current (Duty 1/10 @ 1KHz) IFP 100 mA Power Dissipation PD 110 mW Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Range TOpr -40 to 85 °C Storage Temperature Range TStg -40to 90 °C Soldering Temperature TSOL Reflow Soldering: 260 ºC for 10 sec. Hand Soldering: 350 ºC for 3 sec. Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA 3.0 – 3.6 V Reverse Current IR VR = 5 V – – 50 µA Luminous Intensity IV IF = 20 mA 900 – 1800 mcd 201/2 IF = 20 mA – 120 – degree Viewing Angle Notes: 1. Tolerance of Luminous Intensity: ± 11% 2. Tolerance of Forward Voltage: ± 0.05V Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 3-19-03 AND4WA InGaN Ultra Bright White Light Emission Surface Mount Package Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com Ultra Bright LED 3-19-03