OPTOELECTRONICS LED Displays Unit: mm 8° Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 1.4 8.13 8.0 0.5 Dia. AND-5610 Series G E 1 D B C DP 5 1.68 Dia. GaAsP/GaP–Red; GaP–Green 7 Segment, 0.56 Inch 15.24 14.22 F 19.05 10 A 6 Features 12.4 • RoHS Compliant • 0.56 inch character height • Available in red or green • Suitable for numerical readout for instrument and industrial products • Industry pin-for-pin compatibility • Available in both common cathode and common anode 3.5 Min. 2.54 x 4 = 10.16 Description Common Number of Digits Size Cathode Color Anode Display Face Number of Pins 0.56 inch 1 AND-5610SCL AND-5610SAL Red Red 10 0.56 inch 1 AND-5610GCL AND-5610GAL Green Gray 10 Absolute Maximum Ratings (T = 25°C) Characteristics Symbol Rating Unit IF(DC)/SEG 30 mA IFP/SEG 100 mA VR 3 (Red), 5 (Green) V Operating Temperature Range TOpr -25 to 85 °C Storage Temperature Range TStg -25 to 100 °C DC Forward Current/Segment Pulse Forward Current/Segment Reverse Voltage/Segment Electro-Optical Characteristics (T = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 10 mA – 2.1 3.0 V Reverse Current IR VR = 3 (Red), 5 (Green) – – 100 µA Red IV IF = 10 mA 2.0 3.3 – mcd Green IV IF = 10 mA 1.7 2.9 – mcd Red λP IF = 10 mA – 635 – nm Green λP IF = 10 mA – 567 – nm Red ∆λ IF = 10 mA – 40 – nm Green ∆λ IF = 10 mA – 30 – nm Luminous Intensity Per Segment Peak Emission Wavelength Spectral Line Half Width Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND-5610 Series GaAsP/GaP–Red; GaP–Green LED Displays IV vs. TC IF/Seg vs. VF Forward Current IF/Seg (mA) Relative Luminous Intensity IV 3 2 1 0.5 0.4 0.3 -20 0 20 40 60 80 Case Temperature TC (°C) 50 40 30 TA = 25°C 20 10 5 4 3 2 1 1.6 100 1.8 IFMAX/Seg vs. TA 2.0 2.2 Forward Voltage (V) 2.4 2.6 IV/Seg vs. IF/Seg Luminous Intensity IV/Seg (mcd) Maximum Forward Current IFMAX/Seg (mA) 36 30 Direct Current 24 18 12 6 0 0 20 40 60 80 100 TA = 25°C 10 5.0 3.0 Green Red 1.0 0.5 Ambient Temperature TA (°C) 1 2 3 4 5 7 10 Forward Current IF/Seg (mA) 20 30 AND-5610 Series Pin Connection Table AND-5610SCL/GCL Pin Connection Pin AND-5610SAL/GAL Connection Pin Connection Pin Connection 1 Anode E 6 Anode B 1 Cathode E 6 Cathode B 2 Anode D 7 Anode A 2 Cathode D 7 Cathode A 3 Common Cathode 8 Common Cathode 3 Common Anode 8 Common Anode 4 Anode C 9 Anode F 4 Cathode C 9 Cathode F 5 Anode Dp 10 Anode G 5 Cathode Dp 10 Cathode G Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07