REVISION DESCRIPTION Changed HDMI/M Mold Design / Changed From Crimp Terminal to Solder Terminal REV. A 9150 ± 200 3 2 11 12 13 14 1 2 18 9 9 8 CN2 16 19 APPROVED DP 17 8 15 1 CN1 1 10 4 5 6 7 DATE 03-12-07 24 C5 3.65 ± 0.3 FRONT FRONT DVI (18+1)P/M ASS’Y TYPE HDMI/M MOLDING TYPE No. PIN OUT TAPE CN1 200 ± 20 17 16 3 1 2 6 4 5 9 7 8 CN2 ORANGE WHITE DRAIN BLACK WHITE DRAIN YELLOW WHITE DRAIN 1 2 3 9 10 11 17 18 19 CN1 CN2 PARTS NAME QTY REMARKS SPECIFICATION STANDARD 1 HDMI/M - CONTACT BRASS / GOLD FLASH 19 2 HDMI/M - INSULATOR PBT / BLACK 1 3 HDMI/M - SHELL STEEL / NICKEL PLATED 1 4 PCB 1 10 12 11 15 WHITE RED DRAIN WHITE 23 24 22 6 5 HDMI/M - INNER MOLD PE NATURAL 1 6 HDMI/M - COPPER FOIL WIDTH: 20mm 1 7 HDMI/M - OUTER MOLD 60P PVC / COLOR: BLACK 1 16 18 17 YELLOW RED BLACK 7 14 15 8 DVI (18+1)P/M - CONTACT BRONZE / GOLD FLASH SOLDER TYPE 19 9 DVI (18+1)P/M - INSULATOR THERMOPLASTIC / BLACK UL94-V0 1 DVI (18+1)P/M - SHELL STEEL NICKEL PLATED 19 BROWN 10 16 1 CAN STEEL TIN PLATED ID: 8.0mm SHELL BRAID 11 1 12 DVI (18+1)P/M - COVER 45P PVC / COLOR: BLACK 1 13 THUMB SCREW #4-40 2.8x45, NICKEL PLATED 2 14 SCREW-MOLD 35P PVC / COLOR: BLACK 2 15 CABLE KL03035ABK01A 1 16 MINI TIE PE / BLACK 2 17 POLYBAG PE / 0.08x260x300mm 1 SHELL NOTES: 1. CABLE: UL20276 [(26AWGx1P+DW+FOIL)x4+28AWGx3C+28AWGx1P+MYLAR+FOIL+BD]x1 OUTER PVC JACKET: BLACK, OD: 8.0 ± 0.2mm CHARACTER IMPEDENCE: 100 ohm PRINTING: “E166307 AWM STYLE 20276 28AWG 80°C 30V VW-1 LOW VOLTAGE COMPUTER CABLE” 2. HOOD: MOLDED TYPE, COLOR: BLACK COPPER FOIL MUST BE SOLDERED 360° AROUND THE CONNECTOR SHELL 3. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 1 ohm MAX. 4. PACKING: 1PC/POLYBAG Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 Qualtek Electronics Corp. WCI DIVISION Part Number: 1721019-30 Description: HDMI/M - DVI (18+1)P/M REV. A 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-25-07 01-25-07 JJH / 01-25-07