REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B CURRENT RATING A. @ 115 VAC..........................................6 A RMS MAX B. @ 250 VAC..........................................6 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 40.0 ± 0.1 40.0 ± 0.5 50.7MAX. 29.5 ± 0.5 M3 60.0 ± 1.0 .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 2 5 8 15 20 32 40 25 DIF. MODE dB / 2 5 8 15 15 30 35 35 28.7MAX. 56.0MAX. 14.5 ± 1.0 62.5MAX. FREQ. MHz 66.0MAX. APPROVED DP 1-2. R2.5MAX. Ø3.3 ± 0.2 DATE 06-01-06 RoHS Compliancy ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. PHYSICAL DIMENSIONS 65.7REF. DESCRIPTION 59.5MAX. 2. ELECTRICAL SCHEMATIC L: C1: C2: R: 0.45mH 0.22uF 2200pF 1.0MΩ 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. USE 5X20mm FUSE 1-10. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 880-06/006 EMI FILTER UNIT: mm REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 11-10-04 11-10-04 JJH / 11-10-04