REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B DESCRIPTION Ø3.3 ± 0.3 38.0MAX 1-2. CURRENT RATING A. @ 115 VAC..........................................3 A RMS MAX B. @ 250 VAC.........................................3 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.20 mA MAX B. @ 250 VAC 50Hz.............................0.40 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2500 VDC B. LINE TO LINE.....................................1740 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 50.5MAX 20.50 ± 0.3 40.00 ± 0.5 5.5 ± 0.5 31.0MAX APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. PHYSICAL DIMENSIONS: 15.0 ± 0.7 SOLDER 14.0 ± 0.5 16.95 ± 0.5 .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / 10 15 22 30 35 45 45 48 DIF. MODE dB / / / 0 5 14 40 45 38 FREQ. MHz 40.0 ± 0.1 8.6 ± 0.5 25.9MAX DATE 06-01-06 RoHS Compliancy Ø3.6 ± 0.2 R6.0(4X) 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT 30.5 ± 0.1 PANEL CUTOUT 2. SCHEMATIC: L: 2.3mH C1: 0.033uF C2: 2200pF Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 857-03/047 EMI FILTER UNIT: mm REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 12-06-02 12-06-02 JJH / 12-06-02